No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 Object Storage Service (Compatible with Amazon S3 APIs) Administrator Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring SMS Notification

Configuring SMS Notification

After the SMS notification is successfully set, alarms are sent through SMS to a specific recipient in real time. Before enabling SMS notification, ensure that an SMS modem is installed and a SIM card is inserted.

Prerequisites

An SMS modem has been installed and a SIM card has been inserted. For details, see OceanStor 9000 Hardware Installation Guide

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Alarm Settings > SM Notification.
  3. Select Enable.
  4. Specify the service number of the SMS center.

    The format of the service number of the SMS center is: plus sign (+)+country code+service number of the SMS center in the region where the OceanStor 9000 resides.

  5. Add recipient information, as shown in Figure 19-4.
    1. Click Add.
    2. In the Add Recipient Information dialog box that is displayed, set Recipient Phone Number to the recipient mobile phone number, select alarm severities for alarms to be sent in Alarm Severity, and click OK.

      If the recipient mobile phone number is not a native number, it must be in the format of plus sign (+)+country code+phone number.

      Alarm Severity can be Critical, Major, Warning, and/or Informational.

      The Recipient Phone Number contains a minimum of 3 characters.

    3. Click OK.

    Figure 19-4  Adding recipient information

  6. In the Recipient Phone Number list, select a recipient mobile phone number and click Test. In the dialog box that is displayed, click OK.

    • If the settings are correct, the mobile phone number will receive a test short message.
    • If the settings are incorrect, the mobile phone number cannot receive a test short message. In this case, reset the recipient information.

Translation
Download
Updated: 2019-04-28

Document ID: EDOC1000122523

Views: 12232

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next