No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 Object Storage Service (Compatible with OpenStack Swift APIs) Administrator Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
List of Operation Portals

List of Operation Portals

Table 19-1 lists the address, default account, and default password of each portal used in administrators' routine operations.

You must change the default password of default account upon delivery of the system to reduce potential security risks. You are advised to periodically change the password.

NOTE:

The front-end service network and management network of OceanStor 9000 support both IPv4 and IPv6. Whether IPv4 or IPv6 addresses are configured depends on the network plan.

Table 19-1  List of operation portals

Portal

Portal Address

Default Account and Password

DeviceManager

https://IPv4:8088 or https://[IPv6]:8088

IPv4 or IPv6 indicates the Management Network IPv4 Address or Management Network IPv6 Address specified in the configuration file during software installation.

admin/Admin@storage

omuser/Omuser@storage

CLI

Use the management IP address to remotely log in to the Linux operating system of a storage node and then run: cli_start -u admin.

admin/Admin@storage

Toolkit

https://IPv4:8098 or https://[IPv6]:8098

IPv4 or IPv6 indicates the management IP address.

NOTE:

The Toolkit service is disabled by default. To enable the Toolkit service, log in to DeviceManager and Choose Settings > Enable Toolkit.

admin/Admin@storage

SystemReporter (used only when the SystemReporter report server exists)

https://IPv4:8088 or https://[IPv6]:8088

IPv4 or IPv6 indicates the IP address of the SystemReporter report server. If an HTTPS service port is manually specified during software installation, use the specified port instead of port 8088.

admin/Admin@storage

iBMC of a storage node (P12E/P25E/P36E/C36E)

https://IP, where IP indicates the IP address of the Mgmt port on a storage node.

root/Huawei12#$

IPMI port of a storage node (P12/P25/P36/C36)

https://IP, where IP indicates the IP address of the IPMI port on a storage node.

admin/Admin@storage

Linux operating system running on a storage node

Use SSH to remotely log in to the operating system as user omuser.

Use KVM to log in to the operating system as user root.

root/Root@storage

omuser/Omuser@storage

Translation
Download
Updated: 2019-04-28

Document ID: EDOC1000122524

Views: 10490

Downloads: 86

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next