No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R006C00 Security Maintenance 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking System Processes

Checking System Processes

During the operating of the system, many processes will be triggered. The unnecessary processes may impair system performance and security. Checking and handling system processes periodically can reduce such risks.

When conducting security maintenance, the administrator needs to check for and handle unnecessary processes to prevent risks.

Perform the following steps to check the system process:

  1. Locally log in to the node as root.
    • P12E/P25E/P36E/C36E: Use the KVM to log in to the node.
    • P12/P25/P36/C36: Use the KVM to log in to the node.
    • C72: Use the system serial port on controller enclosure to log in to the node.

      The baud rate is 115200. There are 8 data bits and 1 stop bit. Parity check and data flow control are not implemented.

  2. Run ps -ef to check for unnecessary processes.
Translation
Download
Updated: 2019-04-28

Document ID: EDOC1000122530

Views: 12650

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next