No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro X6000 Server HMM Command Reference 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This document describes the underlying management software Hyper Management Module (HMM).

After reading this document, you can learn about the HMM functional modules, functions provided by each module, relationships between the modules, and all operation commands used on the HMM.

This document is used for the management module of FusionServer Pro X6000 server.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

This document describes commands for network deployment and maintenance of Huawei equipment.

This document does not include the commands for production, assembly, or detection of returned or repaired parts.

Incorrect use of the commands for engineering or fault location may cause device exceptions or service interruption. Contact Huawei technical support if you need to use these commands.

Only the professional or qualified personnel who can identify dangers in the server field can run the commands described in this document.

Symbol Conventions

The following table lists the symbols that may be found in this document.



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History






Changed the document name.



Updated Fan Commands.



Updated About This Document.



Updated Querying Basic PSU Information (psuinfo).



Updated Setting the PSU Work Mode (psuworkmode).



This issue is the first official release.

Updated: 2019-08-05

Document ID: EDOC1000125144

Views: 5828

Downloads: 81

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next