No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
XH321 V3 Server Node V100R003 User Guide 07
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the appearance, functions, and structure of the XH321 V3, how to install, remove, and configure the XH321 V3, and how to install the OS supported by the XH321 V3.

The document provides guidance on how to replace internal components, configure boot options, redundant array of independent disks (RAIDs), and IP addresses for the intelligent baseboard management controllers (iBMCs) on the server, log in to the web user interface (WebUI), and install the OS.

Intended Audience

This document is intended for:

  • Technical support engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 07 (2019-12-03)

This issue is the seventh official release.

Issue 06 (2018-03-05)

Type

Description

Add

Added LOM chip model description. For details, see Node Panel (2 GE Onboard Ports) and Node Panel (2 GE + 2 x 10GE Onboard Ports).

Issue 05 (2017-12-15)

Type

Description

Modify

Modified SN description. For details, see Node Panel (2 GE Onboard Ports).

Issue 04 (2017-09-15)

Type

Description

Modify

Modified environment parameter description. For details, see Technical Specifications.

Issue 03 (2017-07-18)

Type

Description

Modify

Modified environment parameter description. For details, see Technical Specifications.

Add

Added description about heat dissipation restraints of different CPU models and about 128 GB DIMMs. For details, see Technical Specifications and Physical Structure.

Issue 02 (2017-02-17)

Type

Description

Update

The serial number figure and description are updated. For details, see Node Panel (2 GE Onboard Ports) or Node Panel (2 GE + 2 x 10GE Onboard Ports).

Issue 01 (2016-11-21)

The issue is the first official release.

Translation
Download
Updated: 2019-12-09

Document ID: EDOC1000125146

Views: 11413

Downloads: 312

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next