No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Date and Time

Date and Time

Setting the Date and Time on the Phone LCD Screen

  1. Tap . On the APPLICATIONS tab, tap Settings.
  2. In the SYSTEM area, tap Date & time.

    The date and time settings screen is then displayed. On this screen, you can set the following parameters:

    • Automatic date & time: Set your IP phone to automatically time-synchronize with the network. When setting Automatic date & time, you need to specify the IP address of the time synchronization server.
    • Set date: Set the date for your IP phone.
    • Set time: Set the time for your IP phone.
    • Select time zone: Set the time zone for your IP phone.
    • Use 24-hour format: Set the 24-hour format as the time format for your IP phone.
    • Choose date format: Set the date format for your IP phone.
    • Time Synchronization Server: Set the IP address of the time synchronization server. You can set the time synchronization server only after your administrator password has been verified. For any questions, contact your system administrator.

Setting the Date and Time on the Web Page

  1. On the web page, choose System > Date & Time.
  2. Select either Automatic or Manual from Time Update Mode.


    When Manual is selected, you can only set the time zone. In this case, you can set the specific date and time on the phone LCD screen.

  3. Set the desired time zone in Time Zone.
  4. Click Save.
Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 33118

Downloads: 304

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next