No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


  1. Tap . On the APPLICATION tab, tap Settings.
  2. In the PERSONAL area, tap Security.

    The security settings screen is then displayed. On this screen, you can set the following parameters:

    • Screen lock: Set the screen lock mode to None (slide), Pattern, PIN, or Password.
    • Make pattern visible: Set the phone to display the pattern when you are drawing the pattern to unlock the screen.
    • Automatically lock: Set the amount of time before the screen automatically locks.
    • Power button instantly locks: Set the phone to lock the screen immediately you press the power button.
    • Encrypt phone: Set whether to enter a PIN or password each time the IP phone is powered on.
    • Owner info: Set the phone to display the owner information or any custom information on the locked screen.
    • Make passwords visible: Set whether to show passwords as you enter them on the phone.
    • Device administrators: Check the device manager installed on the IP phone. You can enable or disable it.
    • Unknown sources: Set whether to allow installation of any applications.
    • Trusted credentials: Use certificates and credentials to secure the usage of applications.
    • Install from SD card: Install encrypted certificates stored on the SD card.
    • Clear credentials: Delete all credentials from the IP phone and reset the password.

Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 30470

Downloads: 297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next