No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clock

Clock

You can use this application to set an alarm, check the time of any place in the world, calculate the lasting time of an event, set a timer, and configure it as the on-screen clock.

Tap . On the APPLICATION tab, tap Clock. The Clock tab is displayed by default on eSpace 8950.

Alarm

Setting an Alarm
  1. On the Clock tab, tap in the lower left corner.
  2. Tap in the upper right corner of the screen.
  3. Enter the alarm time and tap OK.

    NOTE:

    If you have set the system time of eSpace 8950 as 12-hour time, you need to select AM or PM when setting the alarm time.

    The alarm you have set is displayed on the Alarms screen.

    • To enable or disable an alarm

      Tap the enable/disable switch on the right side of an alarm.

    • To edit the alarm time

      Tap the alarm time you want to edit, and enter the time you want.

    • To add a label for an alarm

      Tap the arrow under the enable/disable switch, tap Label, and enter the label name you prefer.

    • To set repeated alarm time

      Tap the arrow under the enable/disable switch, select REPEAT, and set the alarm time.

    • To change the alarm sound

      Tap the sound name and select the sound you prefer.

Setting the Alarm Sound Parameters
  1. On the Alarms or Clock screen, tap and select Settings.
  2. In the ALARMS area, tap and set the alarm parameters you want to modify.

    • Silence after

      Select the duration of the alarm sound.

    • Snooze length

      Select the alarm snooze duration.

    • Alarm volume

      Adjust the alarm volume.

    • Volume buttons

      Select the operation that you want the volume buttons to execute: snooze, stop, or no operation.

Deleting an Alarm
  1. Tap and hold an alarm until it turns blue.
  2. Tap in the lower right corner of the alarm.
  3. In the dialog box that is displayed, tap OK.

Clock

Tap . Then you can check the current date and time.

Tap . Then you can add the clocks of any other cities around the globe.

Configuring the Clock Display Mode
  1. On the Alarms or Clock screen, tap and select Settings.
  2. In the CLOCK area, tap and set the clock options you want to change.

    • Style

      Select an analog or digital clock.

    • Automatic home clock

      Select this option if you want to get informed of your home time in real time, even when you are traveling.

    • Home time zone

      Set your home time zone.

Timer

  1. Tap .
  2. Enter the time you want and tap START.

    When the timer is going, you can add an additional minute, pause the timer, or delete the current timer.

    The timer beeps when the time is up. It keeps beeping until you tap to stop.

Stopwatch

  1. Tap .
  2. Tap START.

    To pause the stopwatch, tap STOP. You can also add laps while the stopwatch is running by touching the icon to the left of the stopwatch.

Download
Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 34012

Downloads: 308

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next