No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Placing Emergency Calls

Placing Emergency Calls

You can still place emergency calls (for example, 911) when a phone is unregistered or locked.

In the IMS+UC or EC6.X (since the V200R003C30SPC500 version) network environment, you can place LBS-enabled emergency calls. LBS is short for location based service. When you are placing an LBS-enabled emergency call, the emergency call center can obtain your current location, facilitating their further actions.

Background

The administrator configures the physical location information on the BMP (IMS+UC) or USM (EC6.X). Terminals report their current locations to the server when they are logged in. The location information helps the emergency contact center to locate the terminals when emergency calls are made. This is called the LBS. The location information is configured by the administrator on the BMP (IMS+UC) or USM (EC6.X), and it is not automatically collected by certain programs on the terminals. In addition, the location information indicates physical locations within the enterprise and does not belong to personal privacy. When configuring the location information, the administrator needs to comply with local laws and regulations.

Prerequisites

Before using the emergency call service, ensure that your IP phone has the call source, emergency call prefix, and emergency call number configured. For any questions, contact your system administrator.

NOTE:
  • In the factory defaults of an IP phone, the emergency call service is not enabled for the IP phone.
  • On the EC6.X network, you can check the configured physical location information under Settings > About phone > Location on the LCD screen. If the information is not displayed, contact the system administrator.

Placing Emergency Calls

  • Using a Locked IP Phone
    1. You can:
      • Tap EMERGENCY CALL.
      • Directly pick up your phone.
      • Press .

      The screen for entering an emergency number is displayed.

    2. Enter an emergency number.
    3. Tap .
  • Using an Unregistered IP Phone
    1. You can:
      • Tap in the lower left corner of the screen.
      • Directly pick up your phone.
      • Press .

      The screen for entering an emergency number is displayed.

    2. Enter an emergency number.
    3. Tap .
Download
Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 25896

Downloads: 279

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next