No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Distinctive Ring

Distinctive Ring

You can set distinctive rings for internal, external, and hunt group calls.


Before using the distinctive ring function, ensure that your account has been assigned the distinctive ring service rights on the IP phone and server. For any questions, contact your system administrator.

The ring priorities in descending order are as follows: contact ring, group ring, ring that matches the ringtone parameter, internal or external call ring, hunt group ring, and default ring.


In the IMS+UC environment, the IP phone supports distinctive rings for contacts both inside and outside of the IMS group.

Setting Internal/External Ringtone

You can set the internal/external ringtone on the phone LCD screen or web page.


The priority of the individual distinctive ring function is higher than that of the system distinctive ring function. To ensure that the internal/external ringtone takes effect, you must disable the individual distinctive ring function on the server.

Disabling Individual Distinctive Ring

  1. Log in to the uPortal as a common user.
  2. Choose Call Service.
  3. Choose Ringing Service > Distinctive Ringing.
  4. Select Disable, as shown in the following figure.

    Figure 23-1 Disabling individual distinctive ring

Setting the Internal/External Ringtone

  1. Tap . On the APPLICATION tab, tap Settings.
  2. In the DEVICE area, tap Sound.
  3. In the RINGTONE area, set the internal/external ringtone.

After the internal/external ringtone is set, the corresponding ringtone is played when a call is received from an internal or external number.

Setting Individual Distinctive Ring

To use the individual distinctive ring function, you need to set ringtone parameters on the server and phone respectively.

Configuration on the Server

In the EC6.X network environment, you can log in to the personal portal of the server to set individual distinctive ring. For details about the personal portal address of the server, contact the system administrator.

  1. Log in to the uPortal as a common user.
  2. Choose Call Service.
  3. Choose Ringing Service > Distinctive Ringing, select Enable and specify the parameters in the dialog box on the right, and click Save.


    When setting individual distinctive ring, select Ringing mode0 and Ringing mode3 to Ringing mode7.

    Figure 23-2 Configuring the Distinctive Ringing service

Configuration on the Phone Web Page

  1. On the web page, choose Preference > Ringtone > Ringtone Parameter Settings.
  2. Enter the parameter field in the Parameter text box, as shown in the following figure.

    Figure 23-3 Setting ringtone parameters

    For example, if Ringing mode is set to Ringing mode 3, set Parameter to pattern3; if Ringing mode is set to Ringing mode 4, set Parameter to pattern4. The same rule applies to the rest. You can configure pattern7 at most.

    • The value of Parameter can contain letters, digits, and underscores (_) only.
    • The IP phone supports a maximum of 10 ringtone parameters with associated ringtones.

  3. Select music from the Local Ringtone list as the ringtone for incoming calls.

After the ringtone parameters are set, the corresponding ringtone is played based on the ringtone parameter settings when a call of the specified type or from the specified calling number is received.

Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 30665

Downloads: 297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next