No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Local Conferences

Local Conferences

NOTE:
  • Before using the local conference function, ensure that your account has the local conference function enabled and instant conference function disabled. For any questions, contact your system administrator.
  • Ensure that on the phone web page, you have enabled the local conference service rights.
  • A line must have at least two calls configured to create a local conference.
  • The local conference function supports only voice.

You can create a local conference using Join or Merge Call. For detailed operations, see Table 41-1.

Table 41-1 Creating a local conference

If You Want to...

Then...

Create a local conference using Join

  1. Tap Conferenceduring the call with user B.

  2. Enter the number of user C and tap or .
    NOTE:

    You can select contacts on the favorites list, contact list, or call history tab, and then tap .

  3. After user C answers the call, tap to create a local conference.

Create a local conference using Merge Call

The call between you and user B is in ongoing, and the call between you and user C is placed on hold.

Tap Merge Call to create a local conference.

NOTE:

If there are multiple calls on the current line, you can tap Merge Call. In the dialog box that is displayed, you can merge calls.

After a local conference is created, the conference initiator can manage the conference. Table 41-2 describes detailed operations.

NOTE:

You can tap in the lower part of the phone screen to view the participant list of the current conference.

Table 41-2 Local conference management

If You Want to...

Then...

Add a participant

  1. Tap .
    NOTE:

    If you have set Conference on hold when adding participants on the phone web page, the current call is placed on hold when you enter the dialing screen. If you have set Conference unhold when adding participants, other participants are not affected when you enter the dialing screen.

  2. Enter the number of a user and tap or .
    NOTE:

    You can select contacts on the favorites list, contact list, or call history tab, and then tap .

  3. Tap when the user answers the call.
NOTE:

A local conference supports audio conversation among a maximum of six parties.

Mute a participant

  1. Tap the profile picture of a participant.
  2. Tap Mute.
NOTE:

To unmute a participant, tap Unmute.

View the details of a participant

  1. Tap the profile picture of a participant.
  2. Tap Details.

Change the display sequence of a participant

  1. Tap a participant in the participant list.
  2. Tap Replace and tap the replacing participant.

Mute or unmute yourself

  • To mute yourself: Press while on a call.
  • To unmute yourself: Press while in the mute state.

Delete a participant

  1. Tap the profile picture of a participant.
  2. Tap Delete.
  3. In the dialog box that is displayed, tap OK.

Place a conference on hold

  • Placing a conference on hold: Tap Hold.
  • Resuming a conference: Tap Resume to connect to a conference that was placed on hold.
NOTE:
  • When the conference initiator taps Hold, the conference is placed on hold.
  • When a participant taps Hold, only the participant is placed on hold.

End a conference

  1. Tap .
  2. In the dialog box that is displayed, tap End.
NOTE:
  • The conference initiator can tap to end the conference.
  • Participants can tap to quit the conference.
Download
Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 30468

Downloads: 297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next