No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Accessing the Wi-Fi Screen

  1. Tap . On the APPLICATION tab, tap Settings.
  2. In the WIRELESS & NETWORKS area, tap Wi-Fi. The Wi-Fi screen is displayed.

Turning Wi-Fi On and Connecting to a Wi-Fi Network

  1. In the Wi-Fi network list, tap the Wi-Fi switch to turn Wi-Fi on.

    The IP phone automatically scans and lists all available, in-range Wi-Fi networks.

  2. Tap a Wi-Fi network.

    To connect to an encrypted Wi-Fi network, you must enter the correct password.

Manually Adding a Wi-Fi Network

  1. In the Wi-Fi network list, tap .
  2. Complete the required settings in the Network SSID and Security areas, and set relevant parameters (for example, the password) following the on-screen instructions.
  3. Tap Save.

Connecting to a Wi-Fi Network Using WPS PIN

You can use WLAN Protected Setup (WPS) to simplify connection to a Wi-Fi network. Simply enter a PIN, and a secure Wi-Fi connection is then automatically set up. You do not need to perform complex configurations on the management software for the Wi-Fi hotspot (for example, a wireless router).

  1. In the Wi-Fi network list, tap and choose Advanced.
  2. In the Advanced Wi-Fi list, tap WPS Pin Entry.

    The IP phone automatically generates a PIN.

  3. Enter the PIN on the Wi-Fi hotspot.

Configuring Advanced Wi-Fi Settings

  1. In the Wi-Fi network list, tap .
  2. Tap Advanced.
  3. Set parameters based on the site requirements.


    If the IP phone uses the 5 GHz Wi-Fi frequency band, you also need to set the corresponding country code when connecting the IP phone to a Wi-Fi network. On the Advanced Wi-Fi screen, tap Wi-Fi Country Code and select the corresponding language from the list.

Disabling Wi-Fi

On the notification screen, tap to disconnect the phone from Wi-Fi.

Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 30793

Downloads: 297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next