No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DND

DND

After the DND function is enabled, all incoming calls are automatically rejected but you can still place calls.

NOTE:
  • Before using the Server DND function, ensure that your account has been assigned the Server DND service rights on the IP phone and server. For any questions, contact your system administrator.
  • The Server DND function is available only for the current number. For a new number, you must enable the Server DND function again.

Setting DND

In the IMS+UC network environment, the DND function is set on eSpace Portal. For detailed operations, see the eSpace UC Product Documentation. In the IMS environment, see the IMS Product Documentation.

In the EC6.X or UC2.X network environment, you can set the DND function on your phone LCD screen or web page. For detailed operations, see Table 17-1.

Table 17-1 DND setting

If You Want to...

Then...

Set DND on the phone LCD screen

  1. Tap . On the APPLICATION tab, tap Settings.
  2. In the Call Settings area, tap DND Settings.
  3. Tap a desired DND mode.
    • Server DND: The phone does not receive any calls.
    • Local DND: Tap either Call Reject or Ringer Off.

Set DND on the web page

  1. Choose Call Settings > DND.
  2. Select a DND mode.
    • Server DND: The phone does not receive any calls.
    • Local DND: Select either Call Reject or Ringer Off.
  3. Click Save.

Table 17-2 describes the DND setting method on the BroadWorks network.

Table 17-2 DND setting

If You Want to...

Then...

Set DND on the phone LCD screen

  1. Tap . On the APPLICATIONS tab, tap Settings.
  2. In the Call Settings area, tap DND Line Selection.
  3. DND All: The DND function takes effect on all registered numbers.
  4. DND Independent: The DND function takes effect on the selected registered number.
NOTE:
  • If you want to change the DND mode, contact your system administrator.
  • Local DND takes effect on all registered numbers and DND line selection is not supported.

Enabling or Disabling DND

  • Tap in Quick Setting to enable DND. Tap to disable DND.
  • In the IMS+UC network environment, tap > Settings > PERSONAL > Account > Status Settings and tap to enable DND. Tap any other states to disable DND.
NOTE:

In the IMS+UC network environment, you can swipe down in the profile picture area of the status bar and tap to enable DND. Tap any other states to disable DND.

After the DND function is enabled, is displayed in the status bar of the phone screen.

Download
Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 28467

Downloads: 290

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next