No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VLAN

VLAN

If your phone has connected to a wired network but is still displayed in the status bar, you need to configure the VLAN.

  1. Tap Log In in the upper right corner of the home screen.
  2. In the Log In dialog box, tap .

  3. On the Network Security screen, tap the VLAN option.

    NOTE:

    To ensure that the VLAN values you configure can take effect, first disable the LLDP-MED function on the Network Security screen.

  4. In the VLAN dialog box, set VLAN ID and VLAN Priority, and tap OK. Till now, the VLAN function is enabled and configured.

    NOTE:

    Obtain the VLAN configuration from your system administrator.

  5. Check the status bar. disappears and the network is properly connected.

Download
Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 30757

Downloads: 297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next