No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The Camera option is available only when the matching USB camera is properly connected to the phone.

  1. Tap . On the APPLICATION tab, tap Settings.
  2. In the DEVICE area, tap Camera.

    The camera settings screen is then displayed. On this screen, you can set the following parameters:

    • Parameter Settings: Adjust the video image brightness, contrast, and digital zoom of the camera.
    • View Status: Check the camera information, including its software, Uboot, and hardware version information.
    • Camera Factory Reset: Restore the camera to its factory defaults.

Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 31131

Downloads: 297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next