No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Groups and Members

Adding Groups and Members

You can add groups and members on the phone LCD screen or web page. You can add a maximum of 128 groups. Each group supports a maximum of 1000 contacts. The total number of contacts in all groups cannot exceed 2000.

NOTE:
  • When the IP phone is downgraded to a version earlier than V200R003C30SPCh00, the maximum number of local contacts on the IP phone is reduced to 1000. If the number of local contacts exceeds 1000, the extra contacts cannot be loaded. Before downgrading the IP phone, you are advised to export local contacts to a file, delete unnecessary local contacts from the file, delete all local contacts on the IP phone, and import the modified local contacts into the IP phone.
  • Because the phone performance is limited, you are advised to add a single contact to only one group. Do not add a contact to more than two groups.
Table 38-7 Adding groups and members

If You Want to...

Then...

Add groups and members on the phone LCD screen

  1. Tap .
  2. On the Groups tab, tap .
  3. Enter a group name.
  4. (Optional) Select Ringtone.
  5. Select contacts.
  6. Tap Done.

Add groups and members on the phone web screen

  1. Choose Preferences > Contacts.
  2. On the Groups tab, click Add Group.
  3. Enter a group name.
  4. Select contacts in Select Group Member.
  5. Click Finish.
Download
Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 26229

Downloads: 281

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next