No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 and 8950S IP Phone V200R003C30 User Guide

Describes the services supported by the eSpace 8950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Conference (BroadWorks)

Network Conference (BroadWorks)

  • Before using the network conference function, ensure that your account has been assigned the network conference service right on the server.
  • Ensure that you have enabled the instant conference service rights on the phone web page.
  • For any questions, contact your system administrator.

You can create a network conference using Conf or Merge Call. For detailed operations, see Table 41-5.

Table 41-5 Creating a network conference

If You Want to...


Create a network conference using Conf on the talking screen

  1. You (for example, user A) are talking with user B. You tap Conf.
  2. You select or enter the number of user C.
  3. You tap or .
  4. User C answers the call and you can talk with user C. Then you tap .

Create a network conference using Merge Call

  1. The call between you and user B is in ongoing, and the call between you and user C is placed on hold.
  2. You tap Merge Call to create a network conference.

If there are multiple calls on the current line, you can tap Merge Call. In the dialog box that is displayed, you can merge calls.

After a conference created on a shared line is placed on hold, the peer party of the shared line can switch the line and tap Resume to connect to the conference and view the status of participants.

After a network conference is created, the conference initiator can manage the conference. Table 41-6 describes detailed operations.

Table 41-6 Network conference management

If You Want to...


Add a participant

  1. On the conference screen, tap . The keypad is displayed.
  2. Enter or select the number of a user.
  3. Tap or .
  4. Tap when the user answers the call.

A maximum of 15 participants (including the moderator) can be added to a conference.

Remove a participant

  1. Tap the profile picture of a participant.
  2. Tap Delete.
  3. In the dialog box that is displayed, tap OK.

View the details of a participant

  1. Tap the profile picture of a participant.
  2. Tap Details.

Change an audio conference to a video conference

  1. Tap .
  2. Tap Video Conference.

Enable or disable local video

  1. Tap .
  2. Tap Stop Video or Start Video.

Mute or unmute yourself

  • To mute yourself: Press or tap .
  • To unmute yourself: Press or tap while in the mute state.

During a conference, the moderator cannot mute other participants. The moderator can only view the mute status of other participants.

End a conference

Hang up the phone or tap .

In a voice conference, the call screen is displayed on a common participant's phone.

In a video conference, a common participant can view the local video and videos of other participants, and enable or disable the local video.

A participant can hang up the phone or tap to leave the current conference.

Updated: 2019-06-21

Document ID: EDOC1000128683

Views: 33945

Downloads: 308

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next