No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PagingX

PagingX

NOTE:

eSpace 7910 and 7950 IP Phone supports multiple incoming paging calls. PagingX indicates the X-th paging call, and the value of X ranges from 1 to 10.

Table 2-74 Paging configuration

Item

Description

Setting

Default Value

Effective upon Restart

PagingIP

Multicast IP address.

Only IPv4 addresses are supported.

There is no default value.

N

PagingPort

Port number.

Value: 1024 to 65535

1024

N

PagingGroupName

Paging group name.

Value: 0 to 31 bytes

There is no default value.

N

PagingGroupNumber

Paging group number.

Value: 0 to 31 bytes

There is no default value.

There is no default value.

N

Pagingcodec

Codec.

-

PCMA

N

PagingPtime

Packetization time.

Value: 5, 10, 20, 30, 40, 50, or 60

0

N

PayloadType

PT value.

Value: 0 to 127

8

The value cannot be changed.

N

Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000129165

Views: 51073

Downloads: 205

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next