No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Media

Media

Table 3-39 Media

Item

Description

Setting

Default Value

Effective upon Restart

DTMFTransferMode

DTMF transmission mode.

Value: 0 or 1

  • 1: RFC2833
  • 0: Inband

1

N

DTMFEfectLoadvalue

DTMF payload.

Value: 96–255

101

N

ILBCEfectLoadvalue

iLBC payload.

Value: 96–126

97

N

ILBCMode

Packetization duration of the iLBC load.

Value: 20 or 30

Unit: ms

30

N

AACLDPayloadType

AAC-LD payload

Value: 96–126

98

N

G7221PayloadType

G.722.1 payload

Value: 96–126

99

N

G7222PayloadType

G.722.2 payload

Value: 96–126

100

N

OpusPayloadType

Opus payload

Value: 96–126

112

N

OpusSample

Opus sample rate

Value: 0, 1 or 2

  • 0: 16KHz
  • 1: 24KHz
  • 2: 48KHz

2

N

Ptime

Packetization duration of the Voice Codec.

Value: 10, 20, 30, 40, 60

20

N

NetATE

Indicates whether to enable the function of using redundancy transmission to adjust the packetization duration or transmission rate of voice media streams to reduce the packet loss rate and improve the VoIP quality according to the varied network conditions.

Value: 0 or 1

  • 1: enable
  • 0: disable

1

N

EncryptCalloutUseMKI

Whether to enable MKI parameter carrying.

Value: 0 or 1

  • 1: enable
  • 0: disable

0

N

EncryptCalloutUsePeriod

Whether to enable MKI parameter carrying.

Value: 0 or 1

  • 1: enable
  • 0: disable

1

Y

PrefCodecOnly

Whether the IP phone responds to the SDP negotiation with the preferred codec capability.

Value: 0 or 1

  • 1: The IP phone responds with the preferred codec capability.
  • 0: The IP phone responds with all codec capabilities.

0

-

Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000129165

Views: 55431

Downloads: 206

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next