No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LineKeyX

LineKeyX

NOTE:

eSpace 7910 and 7950 IP phones have multiple line buttons. LineKeyX indicates the X-th line button. For eSpace 7910 IP Phone, the value of X ranges from 1 to 6. For eSpace 7950 IP Phone, the value of X ranges from 1 to 12.

Table 2-67 Line X button

Item

Description

Setting

Default Value

Effective upon Restart

LableName

Label name for the line 1 button.

Label name to save the user-defined button. This value of this parameter cannot exceed 127 bytes.

There is no default value.

N

BtnType

A total of twenty three button types are included.

Value: 13, 14, 15, 23

  • 13: Private
  • 14: Shared
  • 15: Intercom
  • 23: CC

13

N

ActionData

Value of a programmable button. If the button type of the programmable button is speed dial, the value of the programmable button is the called number, corresponding to the peer number configured on the web page. For the intercom service, the value is the target number of an intercom call. For the shared line service, the value is the number of the shared line displayed to called parties.

Value: 0–127 bytes

There is no default value.

N

ExtDataOne

Calling account ID in the speed dial service.

Value: 0–6

0: auto

  • 1: account 1
  • 2: account 2
  • 3: account 3
  • 4: account 4
  • 5: account 5
  • 6: account 6

0

N

ExtDataTwo

Whether to enable the BLF function in the speed dial service.

Value: 0 or 1

  • 0: disable the BLF function
  • 1: enable the BLF function

0

N

ExtDataThree

Number corresponding to the account ID for making calls.

You do not need to manually set this parameter. The network management system delivers the value.

There is no default value.

-

CentrexNum

Centrex number.

-

There is no default value.

N

CallNum

Number of calls per line.

Value: 1 to 12

12

N

Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000129165

Views: 51081

Downloads: 205

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next