No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Service

Service

DND

Table 2-6 Do Not Disturb (DND)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the DND service.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • CC: 0
  • UC2.X, EC6.X, UC2.0, IMS+UC, IMS, Asterisk, Broadsoft and Other third-party networks: 1

N

ServiceRegister

Whether eSpace 7910/7950 has registered the DND service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the DND service.

Value: a string of 31 bytes

  • UC2.X, CC, IMS+UC and Other third-party networks: *56#
  • UC2.0: *56
  • Asterisk, Broadsoft: *78
  • IMS, EC6.X: *56*#

N

DeactiveAccessCode

Access code used for deactivating the DND service.

Value: a string of 31 bytes

  • UC2.X, CC, IMS+UC, IMS, EC6.X and Other third-party networks: #56#
  • UC2.0: #56
  • Asterisk, Broadsoft: *79

N

CFU

Table 2-7 Call Forward All (CFA)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CFA service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CFA service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the CFU service.

Value: a string of 31 bytes

  • UC2.X and CC: *57*
  • UC2.0: *57
  • IMS+UC and Other third-party networks: *21*
  • Asterisk and Broadsoft *72
  • IMS and EC6.X: **21*

N

DeactiveAccessCode

Access code used for deactivating the CFU service.

Value: a string of 31 bytes

  • UC2.X and CC: #57#
  • UC2.0: #57
  • IMS+UC and Other third-party networks: #21#
  • Asterisk and Broadsoft *73
  • IMS and EC6.X: ##21#

N

CFB

Table 2-8 Call Forward Busy (CFB)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CFB service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CFB service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

1

N

ActiveAccessCode

Access code used for activating the CFB service.

Value: a string of 31 bytes

  • UC2.X and CC: *40*
  • UC2.0: *40
  • IMS+UC and Other third-party networks: *67*
  • Asterisk and Broadsoft: *90
  • IMS and EC6.X: **67*

N

DeactiveAccessCode

Access code used for deactivating the CFB service.

Value: a string of 31 bytes

  • UC2.X and CC: #40#
  • UC2.0: #40
  • IMS+UC and Other third-party networks: #67#
  • Asterisk and Broadsoft: *91
  • IMS and EC6.X: ##67#

N

CFN

Table 2-9 Call Forward No Answer (CFNA)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CFNA service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CFNA service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the CFNA service.

Value: a string of 31 bytes

  • UC2.X and CC: *41*
  • UC2.0: *41
  • IMS+UC and Other third-party networks: *61*
  • Asterisk: *52
  • Broadsoft: *92
  • IMS and EC6.X: **61*

N

DeactiveAccessCode

Access code used for deactivating the CFNA service.

Value: a string of 31 bytes

  • UC2.X and CC: #41#
  • UC2.0: #41
  • IMS+UC and Other third-party networks: #61#
  • Asterisk: *53
  • Broadsoft: *93
  • IMS and EC6.X: ##61#

N

CFO

Table 2-10 Call Forward Offline (CFO)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CFO service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • Broadsoft: 0
  • UC2.X, UC2.0, EC6.X, CC, IMS+UC, IMS, Asterisk and Other third-party networks: 1

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CFO service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the CFO service.

Value: a string of 31 bytes

  • UC2.X, CC, IMS+UC and Other third-party networks: *45*
  • UC2.0: *45
  • Asterisk: *52
  • IMS and EC6.X: **45*
  • Broadsoft: There is no default value.

N

DeactiveAccessCode

Access code used for deactivating the CFO service.

Value: a string of 31 bytes

  • UC2.X, CC, IMS+UC and Other third-party networks: #45#
  • UC2.0: #45
  • Asterisk: *53
  • IMS and EC6.X: ##45#
  • Broadsoft: There is no default value.

N

CFUVoiceMail

Table 2-11 Call Transfer to Voice Mailbox Unconditional (CTVMU)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CTVMU service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CTVMU service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the CTVMU service.

Value: a string of 31 bytes

  • UC2.X and CC: *91#
  • UC2.0 and IMS+UC: *91
  • Asterisk: *72
  • Broadsoft: *21*
  • IMS and EC6.X: **22#
  • Other third-party networks: *22#

N

DeactiveAccessCode

Access code used for deactivating the CTVMU service.

Value: a string of 31 bytes

  • UC2.X and CC: #91#
  • UC2.0 and IMS+UC: #91
  • Asterisk: *73
  • Broadsoft: #21
  • IMS and EC6.X: ##22#
  • Other third-party networks: #22#

N

CFBVoiceMail

Table 2-12 Call Transfer to Voice Mailbox on Busy (CTVMB)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CTVMB service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CTVMB service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the CTVMB service.

Value: a string of 31 bytes

  • UC2.X and CC: *92#
  • UC2.0 and IMS+UC: *92
  • Asterisk: *90
  • Broadsoft: *40
  • IMS and EC6.X: **68#
  • Other third-party networks: *68#

N

DeactiveAccessCode

Access code used for deactivating the CTVMB service.

Value: a string of 31 bytes

  • UC2.X and CC: #92#
  • UC2.0 and IMS+UC: #92
  • Asterisk: *91
  • Broadsoft: #40
  • IMS and EC6.X: ##68#
  • Other third-party networks: #68#

N

CFNVoiceMail

Table 2-13 Call Transfer to Voice Mailbox on No Reply (CTVMNR)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CTVMNR service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CTVMNR service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the CTVMNR service.

Value: a string of 31 bytes

  • UC2.X and CC: *93#
  • UC2.0 and IMS+UC: *93
  • Asterisk: *52
  • Broadsoft: *41
  • IMS and EC6.X: **62#
  • Other third-party networks: *62#

N

DeactiveAccessCode

Access code used for deactivating the CTVMNR service.

Value: a string of 31 bytes

  • UC2.X and CC: #93#
  • UC2.0 and IMS+UC: #93
  • Asterisk: *53
  • Broadsoft: #41
  • IMS and EC6.X: ##62#
  • Other third-party networks: #62#

N

CFOVoiceMail

Table 2-14 Call Transfer to Voice Mailbox Offline (CTVMO)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CTVMO service on the server.

In the Broadsoft solution, this service is not available.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CTVMO service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the CTVMO service.

Value: a string of 31 bytes

  • UC2.X and CC: *98#
  • UC2.0 and IMS+UC: *90
  • Asterisk: *72
  • Broadsoft: There is no default value.
  • IMS and EC6.X: **46#
  • Other third-party networks: *46#

N

DeactiveAccessCode

Access code used for deactivating the CTVMO service.

Value: a string of 31 bytes

  • UC2.X and CC: #98#
  • UC2.0: IMS+UC: #90
  • Asterisk: *73
  • Broadsoft: There is no default value.
  • IMS and EC6.X: ##46#
  • Other third-party networks: #46#

N

Joint

Table 2-15 Linkage

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the linkage service on the server.

In the Broadsoft or Asterisk solution, this service is not available.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the Linkage service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

CallDeflection

Table 2-16 Call Deflection (CD)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the CD service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.X, UC2.0, Asterisk, Broadsoft and Other third-party networks: 1
  • CC, IMS+UC, IMS and EC6.X: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CD service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for deactivating the CD service.

Value: a string of 31 bytes

There is no default value.

N

DeactiveAccessCode

Access code used for deactivating the CD service.

Value: a string of 31 bytes

There is no default value.

N

Secretary

Table 2-17 Secretary Service (for the Manager)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Manager right:

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the secretary service.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ActiveAccessCode

Access code for activating the manager's private call service.

Value: a string of 31 bytes

There is no default value.

N

DeactiveAccessCode

Access code for deactivating the manager's private call service.

Value: a string of 31 bytes

There is no default value.

N

SecretaryStation

Table 2-18 Secretary Service (for the Secretary)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Secretary right:

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the secretary service.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

Grouppickup

Table 2-19 Co-Group Pickup

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the co-group pickup service on the server.

In the CC and Asterisk solution, this service is not available.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ActiveAccessCode

Access code for using the co-group pickup service.

Value: a string of 31 bytes

  • UC2.X, CC, IMS+UC, IMS, EC6.X and Other third-party networks: *11#
  • UC2.0: *99
  • Asterisk and Broadsoft: There is no default value.

N

Designatepickup

Table 2-20 Designated Pickup

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the designated pickup service on the server.

In the CC solution, this service is not available.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • IMS+UC: 1
  • UC2.X, UC2.0, EC6.X, IMS, Asterisk, Broadsoft and Other third-party networks: 0

N

ActiveAccessCode

Access code for using the designated pickup service.

Value: a string of 31 bytes

  • UC2.X, IMS, EC6.X and Other third-party networks: *11*
  • UC2.0 and IMS+UC: *98
  • Asterisk: **
  • Broadsoft: There is no default value.

N

ACB

Table 2-21 Automatic Callback (ACB)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the ACB service on the server.

In the CC, Asterisk and Broadsoft solutions, the service is not supported.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.0: 1
  • UC2.X, EC6.X, IMS+UC, IMS and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the ACB service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code used for activating the ACB service.

Value: a string of 31 bytes

  • UC2.0: *59
  • UC2.X, EC6.X, IMS+UC, IMS and Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code used for deactivating the ACB service.

Value: a string of 31 bytes

There is no default value.

N

Recording

Table 2-22 Recording

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the recording service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.X, UC2.0, Broadsoft, IMS+UC and Other third-party networks: 1
  • EC6.X, CC, IMS and Asterisk: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the recording service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

CallTransfer

Table 2-23 Call Transfer

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the call transfer service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • CC: 0
  • UC2.X, EC6.X, UC2.0, IMS+UC, IMS, Asterisk, Broadsoft and Other third-party networks: 1

N

ServiceRegister

Whether eSpace 7910/7950 has registered the call transfer service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

CallPark

Table 2-24 Call Park

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the call park service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ActiveAccessCode

Access code for sending the call park request.

Value: a string of 31 bytes

  • UC2.X and CC: *95#
  • UC2.0: *95
  • EC6.X and IMS: *99*
  • IMS+UC: *99
  • Asterisk: 70
  • Broadsoft: *68
  • Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code for retrieving the parked call.

Value: a string of 31 bytes

  • UC2.X and CC: *95*
  • UC2.0: #95
  • EC6.X, IMS and IMS+UC: *12*
  • Broadsoft: *88
  • Asterisk and Other third-party networks: There is no default value.

N

CallHold

Table 2-25 Call Hold

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the call hold service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

ThreepartyConference

Table 2-26 Local Conference

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the local conference service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

VoiceConference

Table 2-27 UC2.0 Instant Conference

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the instant conference service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.0 and IMS+UC: 1
  • UC2.X, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

CorporateDirectory

Table 2-28 Directory

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the directory service on the server.

In the Broadsoft solution, the service is not supported.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

TurnPhone

Table 2-29 One-Key Switch

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the one-key switch service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • IMS+UC: 1
  • UC2.X, UC2.0, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

VoiceCall

Table 2-30 Voice Call

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the voice call service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

ExtensionMobility

Table 2-31 Extension mobility

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the extension mobility service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the extension mobility service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

1

N

SubRegState

Table 2-32 Service subscription in extension mobility

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the service on the server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

BLF

Table 2-33 Busy Lamp Field (BLF)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the BLF service on the server.

This service is available in the EC6.X, UC2.X, IMS and Asterisk solutions.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the BLF service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

Presence

Table 2-34 Presence

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the Presence service on the server.

This service is available only in the UC2.0 and IMS+UC solutions.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.0 and IMS+UC: 1
  • UC2.X, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the presence service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

Intercom

Table 2-35 Intercom

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the intercom service on the server.

This service is available only in the EC6.X and IMS+UC solutions.

In the IMS+UC solution, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the intercom service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

CLIR

Table 2-36 Caller ID restriction

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the caller ID restriction service on the server.

In the UC2.0 and IMS+UC solutions, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the CLIR service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

  • EC6.X and IMS: *83#
  • UC2.X, UC2.0, IMS+UC, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

  • EC6.X and IMS: #81#
  • UC2.X, UC2.0, IMS+UC, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

DenyCallForwarding

Table 2-37 Deny call forwarding

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the deny call forwarding service on the server.

This service is available only in the IMS+UC solution.

In the IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

  • IMS+UC: *60#
  • UC2.X, UC2.0, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

  • IMS+UC: #60#
  • UC2.X, UC2.0, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

Absent

Table 2-38 Absence

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the absence service on the server.

This service is available only in the IMS+UC solution.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • IMS+UC: 1
  • UC2.X, UC2.0, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

  • EC6.X and IMS: *27*#
  • UC2.X, UC2.0, IMS+UC, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

  • EC6.X and IMS: #27#
  • UC2.X, UC2.0, IMS+UC, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

VoiceMail

Table 2-39 Voicemail

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the voicemail service on the server.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • Asterisk and Broadsoft: 1
  • UC2.X, UC2.0, EC6.X, IMS+UC, IMS, CC and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

AbbreviativeDial

Table 2-40 Abbreviated dialing

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the abbreviated dialing service on the server.

This service is available in the EC6.X, UC2.X, IMS+UC and IMS solutions.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • IMS+UC: 1
  • UC2.X, UC2.0, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

There is no default value.

N

PasswordCallLimit

Table 2-41 Password-based call barring

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the password-based call barring service on the server.

This service is available only in the EC6.X and UC2.X solutions.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • IMS+UC: 1
  • UC2.X, UC2.0, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

  • EC6.X and IMS: *34*
  • UC2.X, UC2.0, IMS+UC, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

CallWait

Table 2-42 Call waiting

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the call waiting service on the server.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

  • EC6.X and IMS: *43#
  • UC2.X, UC2.0, IMS+UC, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

  • EC6.X and IMS: #43#
  • UC2.X, UC2.0, IMS+UC, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

Hotline

Table 2-43 Hotline

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the hotline service on the server.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

There is no default value.

N

MCID

Table 2-44 Malicious caller ID (MCID)

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the MCID service on the server.

This service is available only in the IMS+UC solution.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • IMS+UC: 1
  • UC2.X, UC2.0, EC6.X, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

  • EC6.X, IMS and IMS+UC: *33#
  • UC2.X, UC2.0, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

There is no default value.

N

LBS

Table 2-45 LBS-based emergency call

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the LBS-based emergency call service on the server.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

1

N

privacy

Table 2-46 Private call

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the private call service on the server.

This service is available only in the EC6.X and Broadsoft solutions.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.0: 1
  • UC2.X, EC6.X, IMS+UC, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

There is no default value.

N

hold_private

Table 2-47 Private hold

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the private hold service on the server.

This service is available only in the EC6.X and Broadsoft solutions.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.0: 1
  • UC2.X, EC6.X, IMS+UC, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

bridge

Table 2-48 Bridge

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the bridge service on the server.

This service is available only in the EC6.X solution.

In the IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

resume

Table 2-49 Call resume

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the call resume service on the server.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • EC6.X, IMS and CC: 0
  • UC2.X, UC2.0, IMS+UC, Asterisk, Broadsoft and Other third-party networks: 1

N

turnVM

Table 2-50 One button to voicemail

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the one-button-to-voicemail service on the server.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ServiceRegister

Whether eSpace 7910/7950 has registered the service.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Access code for activating the service.

Value: a string of 31 bytes

There is no default value.

N

DeactiveAccessCode

Access code for deactivating the service.

Value: a string of 31 bytes

There is no default value.

N

vvm

Table 2-51 Visual voicemail

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the visual voicemail service on the server.

This service is available only in the IMS+UC solution.

In the UC2.0 or IMS+UC solution, the setting is pushed by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

HuntGroup

Table 2-52 HuntGroup

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the hunt group service on the server.

This service is available only in the EC6.X and UC2.X solutions.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.
  • UC2.X: 1
  • UC2.0, EC6.X, IMS+UC, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

ActiveAccessCode

Prefix for signing in to a hunt group.

Value: a string of 31 bytes

  • UC2.X: 1
  • UC2.0, EC6.X, IMS+UC, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

DeactiveAccessCode

Prefix for signing out of a hunt group.

Value: a string of 31 bytes

  • UC2.X: *71*
  • UC2.0, EC6.X, IMS+UC, IMS, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.
  • UC2.X: #71*
  • UC2.0, EC6.X, IMS+UC, IMS, CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

VirtualVoiceMail

Table 2-53 VirtualVoiceMail

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the virtual voicemail service on the server.

This service is available only in the EC6.X and UC2.X solutions.

Value: 0 or 1

  • 1: eSpace 7910/7950 has registered the service.
  • 0: eSpace 7910/7950 has not registered the service.

0

N

ActiveAccessCode

Prefix for accessing the virtual voicemail.

Value: a string of 31 bytes

  • UC2.X: 91002
  • UC2.0, EC6.X, IMS+UC, IMS , CC, Asterisk, Broadsoft and Other third-party networks: There is no default value.

N

UC2XVoiceConference

Table 2-54 UC2.X Instant Conference

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the instant conference service on the server.

In the UC2.X solution, the service right is maintained by the administrator to ensure consistency with the setting on the server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • UC2.X: 1
  • UC2.0, EC6.X, IMS+UC, IMS, CC, Asterisk, Broadsoft and Other third-party networks: 0

N

Reject

Table 2-55 Call rejection

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the call rejection service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • CC: 0
  • UC2.X, UC2.0, EC6.X, IMS+UC, IMS, Asterisk, Broadsoft and Other third-party networks: 1

N

Ignore

Table 2-56 Incoming call ignorance

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the incoming call ignorance service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • CC: 0
  • UC2.X, UC2.0, EC6.X, IMS+UC, IMS, Asterisk, Broadsoft and Other third-party networks: 1

N

DNDOverride

Table 2-57 DND override

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the DND override service on the server in the Asterisk network environment.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.
  • Asterisk: 1
  • UC2.X, UC2.0, EC6.X, IMS+UC, IMS, CC, Broadsoft and Other third-party networks: 0

N

ActiveAccessCode

Access code for activating the service in the Asterisk network environment.

Value: a string of 31 bytes

  • Asterisk: *80
  • UC2.X, UC2.0, EC6.X, IMS+UC, IMS, CC, Broadsoft and Other third-party networks: There is no default value.

N

Parameter

Table 2-58 Additional Parameters

Item

Description

Setting

Default Value

Effective upon Restart

CFUNum

CFU number.

Value: a string of 255 bytes

There is no default value.

N

CFBNum

CFB number.

Value: a string of 255 bytes

There is no default value.

N

CFNNum

CFNR number.

Value: a string of 255 bytes

There is no default value.

N

CFONum

CFO number.

Value: a string of 255 bytes

There is no default value.

N

VoiceMailGetNum

Voice mailbox access code.

Value: a string of 255 bytes

91002

N

TurnPhoneGetCallCode

Access code for obtaining calls in the mobile extension service.

Value: a string of 255 bytes

*126

N

TurnPhoneMobileNum

Mobile extension number.

Value: a string of 255 bytes

There is no default value.

N

EaddrSearchType

Type of address book search.

Value: 0 or 2

  • 0: fuzzy search
  • 2: search by multiple keywords

0

N

AbbrDial

Abbreviated dialing.

Value: a string of 31 bytes

There is no default value.

N

VoiceMailSupportType

Whether to support visual voicemail.

Value: 0 or 1

  • 0: not support
  • 1: support

1

N

VoiceMailNumber

Access code of the visual voicemail.

NOTE:

This parameter is used only in the IMS+UC network environment.

Value: a string of 255 bytes

There is no default value.

N

VoiceMailSPIN

Password of the visual voicemail.

NOTE:

This parameter is used only in the IMS+UC network environment.

Value: a string of 0–31 bytes

  • 6 asterisks (*): current password in ciphertext
  • Common character string: password in plaintext that the user or administrator needs to change (displayed only when importing or delivering the configuration file)
  • Empty

There is no default value

N

VVMHttpsSupport

Whether the visual voicemail uses HTTPS authentication.

NOTE:

This parameter is used only in the IMS+UC network environment.

Value: 0 or 1

  • 0: HTTP
  • 1: HTTPS

0

N

CallLimitType

Password-based call barring type.

Value: 0, 1, 2, or 3

  • 0: disable
  • 1: national toll call barring
  • 2: international toll call barring
  • 3: national and international toll call barring

0

N

CallLimitCode

Header field of password-based call barring.

Value: a string of 255 bytes

There is no default value.

N

bIsChangeCFUNum

Whether the destination number for call forward all is configurable.

Value: 0 or 1

  • 0: configurable
  • 1: not configurable

0

N

EaddrExactSearchType

Whether to enable accurate search in the directory.

Value: 0 or 1

  • 0: disable
  • 1: enable

0

N

DPark

Table 2-59 Directed Call Park

Item

Description

Setting

Default Value

Effective upon Restart

ServiceRight

Whether users have the permission to configure the direct call park service on the server.

In the EC6.X and UC2.X solutions, the service right is maintained by the administrator to ensure consistency with the setting on the server.

In the IMS+UC solution, the setting of this parameter is issued by the AA server.

Value: 0 or 1

  • 1: The service right is enabled.
  • 0: The service right is disabled.

0

N

ActiveAccessCode

Access code for sending the call park request.

Value: a string of 31 bytes

  • UC2.X: *95#
  • UC2.0: *95
  • Broadsoft: *68
  • IMS+UC: *99
  • EC6.X, IMS and TE: *99*
  • Other third-party networks: There is no default value.

N

DeactiveAccessCode

Access code for retrieving the parked call.

Value: a string of 31 bytes

  • UC2.X: *95*
  • UC2.0: #95
  • Broadsoft: *88
  • EC6.X, IMS, IMS+UC and TE: *12*
  • Other third-party networks: There is no default value.

N

Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000129165

Views: 54470

Downloads: 206

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next