No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LAN

LAN

Table 3-25 IP phone network parameters

Item

Description

Setting

Default Value

Effective upon Restart

AddressingType

IP address type.

Value: DHCP or Static

DHCP

-

IPAddress

IP address.

a string of 16 bytes

There is no default value.

-

SubnetMask

Subnet mask.

a string of 48 bytes

There is no default value.

-

DefaultGateway

Gateway address.

The gateway address must be in the same network segment as the IP address. You can also remain the value empty.

There is no default value.

-

DNSServers

Address of the active DNS server.

a string of 256 bytes

There is no default value.

-

MACAddress

MAC address.

Read-only.

-

-

Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000129165

Views: 54593

Downloads: 206

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next