No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BrdX

BrdX

NOTE:

eSpace 7950 can connect to multiple expansion modules. BrdX indicates the X-th expansion module, and the value of X ranges from 1 to 3.

BtnInfo

Table 2-63 Expansion Module 1

Item

Description

Setting

Default Value

Effective upon Restart

NumberOfInstances

Expansion module number.

Value: 0–3

0

N

BtnInfoInstance
Table 2-64 Expansion Module 1

Item

Description

Setting

Default Value

Effective upon Restart

InstanceID

Instance ID for the service configured on the expansion module.

One configured programmable button corresponds to one instance.

1

N

Loc

Physical position of buttons on the expansion module. The start value is 1.

Value: 1–40. The physical position of a programmable button is recorded only when the button type of the programmable button is not empty.

1: programmable button 1

2: programmable button 2, and so on

1

N

LableName

Label name for a programmable button.

The label name for a programmable button that users have set must not exceed 127 bytes.

There is no default value.

N

BtnType

A total of twenty three button types are included.

Value: 0–25

  • 0: none
  • 1: speed dial
  • 2: XML App
  • 3: group
  • 4: sleep
  • 5: phone lock
  • 6: call forward
  • 7: DND
  • 8: call park
  • 9: pickup
  • 10: group pickup
  • 17: group intercom
  • 18: centrex group
  • 19: hunt group
  • 20: virtual voicemail for the hunt group
  • 21: multicast paging
  • 22: two-stage dialing
  • 24: SOA
  • 25: BLF

0

N

ActionData

Value of a programmable button.

  • If the button type of the programmable button is speed dial, the value of the programmable button is the called number.
  • If the button type is XML application, the value is the address to initiate XML requests.
  • If he button type is SOA, the value is the virtual number configured on the unified gateway.

Value: 0–127 bytes

There is no default value.

N

ExtDataOne

Calling account ID in the speed dial service or SOA.

The value 0 indicates auto, the value 1 indicates account 1, the value 2 indicates account 2, and so on.

Value: 0–6

  • 0: auto
  • 1: account 1
  • 2: account 2
  • 3: account 3
  • 4: account 4
  • 5: account 5
  • 6: account 6

0

N

ExtDataTwo

NOTE:

Parameter settings in the EC6.X or UC2.X network environment are updated from V200R003C00SPCc00.

EC6.X or UC2.X network: whether to enable BLF in the speed dial service, or whether to enable BLF and speed dial in the designated pickup service.

Other networks: whether to enable BLF in the speed dial service.

  • EC6.X or UC2.X network: whether to enable BLF in the speed dial service

    Value: 0 or 1

    0: BLF is disabled.

    1: BLF is enabled.

    Default value: 0

  • EC6.X or UC2.X network: whether to enable BLF and speed dial in the designated pickup service

    Value: 0–3

    0: BLF and speed dial are disabled.

    1: BLF is enabled but speed dial is disabled.

    2: BLF is disabled but speed dial is enabled.

    3: BLF and speed dial are enabled.

    Default value: 0

  • Other networks:

    Value: 0 or 1

    0: BLF is disabled.

    1: BLF is enabled.

    Default value: 0

0

N

ExtDataThree

Number corresponding to the account ID for making calls.

You do not need to manually set this parameter. The network management system delivers the value.

There is no default value.

-

Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000129165

Views: 51157

Downloads: 205

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next