No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration File Parameter Description

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the parameters in the configuration files of the eSpace 7910&7950 IP phones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Access

Access

Table 3-12 Network access mode

Item

Description

Setting

Default Value

Effective upon Restart

ACCESSMODE

IPv4 network access mode

Value: 0–2

  • 0: static IP address
  • 1: DHCP
  • 2: PPPoE

1

N

ACCESSMODEIPV6

IPv6 network access mode

Value: 0–1

  • 0: static IP address
  • 1: DHCP

1

N

Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000129165

Views: 54435

Downloads: 206

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next