No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to Your Phone

Logging In to Your Phone

Automatically Logging In to the Phone LCD Scree

Background

When the EC6.1 solution or later is used, the IP phone is connected to the eSight after being powered on. The IP phone automatically obtains account information and completes registration so that IP phone users do not need to configure any data.

Figure 7-1 shows the IP phone login process.

Figure 7-1 IP phone login process

Process description:

  • Using the redirection server (only for the EC6.1 and EC19.0 solution)
    1. The USM (uPortal) sends the IP Phone information (such as the account, serial number, and registration password) to the eSight.
    2. The USM sends the IP Phone SN and the enterprise's eSight address to the redirection server.
    3. The IP phone accesses the redirection server after being powered on and connected to the network. The redirection server identifies the enterprise to which the IP Phone belongs based on the serial number and sends the corresponding eSight address.
    4. The IP Phone accesses the eSight. The eSight delivers key configuration information to the IP Phone based on the serial number.
    5. The IP phone is registered and the home screen is displayed.
  • Not using the redirection server
    1. The USM (uPortal) sends the IP Phone information (such as the account, serial number, and registration password) to the eSight.
    2. After the IP phone is powered on and connected to the network, the IP phone obtains the eSight address.
    3. The IP Phone accesses the eSight. The eSight delivers key configuration information to the terminal based on the serial number.
    4. The IP phone is registered and the home screen is displayed.

Prerequisites

The system administrator has completed related configurations on the server. For details, see the CloudEC Product Documentation.

Procedure

After being powered on, the IP phone automatically completes registration and login. The home screen is displayed.

If your IP phone connects to the public network in automatic registration mode, the IP phone accesses the redirection server deployed on Huawei public cloud when being powered on. The request contains the terminal SN. The response of the redirection server contains the terminal management server address, and the interface is encrypted using HTTPS.

Manually Logging In to the Phone LCD Screen

Prerequisites

  • During a login, ensure that the phone is properly connected to the network (that is, the icon is not displayed in the upper right corner of the login screen). If you still fail to log in, contact your system administrator.
  • From the login screen, choose More > Language. The Language screen is displayed. You can select a language on this screen.

Procedure

You can perform the following steps to manually log in to the home screen of the phone:

  1. Power on the phone. The login screen is displayed.
  2. Enter the authentication information. For details about how to switch the input method, see Input Method.

    • Login with account: Enter the account and password.
    • Login with number: Enter the number, user name, and password.
    • In the EC6.X network environment, if a login PIN code has been configured for your account, you can also log in to the IP phone using your account and PIN code. For details about how to configure the login PIN code, see Configuring the IP phone PIN.
    • The PIN code consists of only digits for facilitating login on the LCD screen. Its complexity is low, bringing security risks. Use the PIN code with caution.

  3. Press Log In.

    Table 7-1 lists the methods for logging in to your phone on different networks.

    Table 7-1 Login methods on different networks

    Network

    Login Method

    EC6.X

    You can log in to your phone using the uPortal account.

    UC2.X

    You can log in to your phone using the phone number, account, or AD domain account. By default, the phone number is used.

    IMS+UC

    You can log in to your phone using the phone number or account. By default, the account is used.

    IMS

    You can log in to your phone using the phone number. During the login, you need to enter the account, user name, and password.

    Asterisk

    You can log in to your phone using the phone number. During the login, you need to enter the account, user name, and password.

Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 92512

Downloads: 1501

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next