No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Call Park

Call Park

You can hold an active call and retrieve the call on another phone that has been assigned the call park rights within 3 minutes.


Your account has been assigned the call park rights.

Using the Call Park Function

  1. During a call, press More to navigate to Park.
  2. Press Park.

    In the Asterisk network environment, after you press Park, the phone enters the screen for confirming the park operation and plays an announcement, telling you the access code for retrieving the parked call. Press Done to park the call.

Retrieving a Parked Call

If you do not retrieve the parked call from another phone within three minutes, the phone on which the call parking operation is performed receives the call from the parked call number. You can answer the call to retrieve it.

  1. On the home screen of another phone, press More to navigate to Unpark.
  2. Press Unpark.
  3. Enter the call park number and press Unpark.

When multiple numbers exist on the IP phone for retrieving a parked call, the first line is used to retrieve the call by default. To use other numbers to retrieve the call, you can press the corresponding line button on the home screen and enter *12*Number of the user who has parked the call# on the dialing screen to retrieve the call.

Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 99817

Downloads: 1539

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next