No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power Saving

Power Saving

  • In versions earlier than V200R003C00SPC700, you can enable or disable the auto sleep function as required. However, from V200R003C00SPC700, the auto sleep function is enabled by default, and you cannot disable it.
  • When the sleep mode and screensaver are enabled at the same time, the sleep mode takes effect with preference.
  • When the phone enters the sleep or screensaver state on the home screen, you can press a key on the key pad, the Headset button, or the Speaker button to directly access the dialing screen.

Enabling the Auto Sleep Function

In versions earlier than V200R003C00SPC700, you can perform the following steps to enable the auto sleep function. From V200R003C00SPC700, auto sleep is enabled by default.

  1. On the web page, choose System > Power Saving.
  2. Select Enable for Auto Sleep.
  3. Select a value for Sleep After.
  4. Click Save.

Disabling the Auto Sleep Function

In versions earlier than V200R003C00SPC700, you can perform the following steps to disable the auto sleep function. From V200R003C00SPC700, auto sleep cannot be disabled.

  1. On the web page, choose System > Power Saving.
  2. Select Disable for Auto Sleep.
  3. Click Save.

Enabling the Auto Brightness Function

You can perform the following steps to enable the auto brightness function:

  1. On the web page, choose System > Power Saving.
  2. Select Enable for Auto Brightness.
  3. Select a value for Adjustment Time.
  4. Click Save.

    If the value for Sleep After is the same as the value for Adjustment Time, the phone automatically changes to the sleep state at the appointed time.

Disabling the Auto Brightness Function

You can perform the following steps to disable the auto brightness function:

  1. On the web page, choose System > Power Saving.
  2. Select Disable for Auto Brightness.
  3. Click Save.

Enabling the Screensaver Function

You can perform the following steps to enable the screensaver function:

  1. On the web page, choose System > Power Saving.
  2. Select Enable for Screensaver.
  3. Select a value for Delay.
  4. Click Save.

Disabling the Screensaver Function

You can perform the following steps to disable the screensaver function:

  1. On the web page, choose System > Power Saving.
  2. Select Disable for Screensaver.
  3. Click Save.
Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 110309

Downloads: 1576

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next