No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LED

LED

Table 4-2 describes the LED status.

Table 4-2 LED description

LED

Description

MWI LED

  • When a call comes in, the LED blinks red every second.
  • When there is an unread message, the LED blinks red every 3 seconds.

Line button LED

  • When the phone is offhook, dialing, or in an active call, the LED is steady green.
  • When a call comes in, the LED blinks red.
  • When call hold is initiated by yourself, the LED blinks green.
NOTE:

The LED status here is for a line button that has a common line configured. For information about the LED status of a line button that has a shared line configured, see Advanced Secretary.

Headset LED

When the phone is dialing or in an active call in headset mode, the LED is steady red.

Speaker LED

When the phone is dialing or in an active call in speaker mode, the LED is steady red.

Mute LED

When the phone is muted, the LED is steady red.

Call History LED

When there is a missed call, the LED is steady red.

Programmable button LED or line button LED when the programmable button or line button is set as the Speed Dial button and the Busy Lamp Field (BLF) function is enabled (For details about how to enable the BLF function, see Buttons.)

LED status (for EC6.X and UC2.X):

  • When the monitored account is in offhook, dialing, or idle state, the LED is steady green.
  • When the monitored account is in talking state, the LED is steady red.
  • When the monitored account is in ringing or calling state, the LED blinks red.
  • When the monitored account is offline, the LED is off.

LED status (for IMS+UC):

  • When the monitored account is in offhook, dialing, or idle state, the LED is steady green.
  • When the monitored account is in ringing or talking state, the LED is steady red.
  • When the monitored account is away, the LED is steady yellow.
  • When the monitored account is offline, the LED is off.
NOTE:

The functions and status vary depending on the network environment of your IP phone. For any questions, contact your system administrator.

Programmable button LED or line button LED when the programmable button or line button is set as the Speed Dial button and the BLF function is disabled (For details about how to disable the BLF function, see Buttons.)

When the phone is in speed dial or talking state, the LED is steady red.

Programmable button LED or line button LED when the programmable button or line button is set as the BLF function (For details about how to enable the BLF function, see Buttons.)

  • When the monitored account is in offhook, dialing, or idle state, the LED is steady green.
  • When the monitored account is in talking state, the LED is steady red.
  • When the monitored account is in ringing or calling state, the LED blinks red.
  • When the monitored account is offline, the LED is off.

Indicator status when the programmable button or line button is set as the SOA.

(For details about how to enable SOA, see Buttons.)

  • If the indicator is steady green, the subscribed FXO link is idle.
  • If the indicator is steady red, the subscribed FXO link is occupied.
  • If the indicator is off, the FXO link subscription fails or the subscribed FXO link is faulty.

Line button LED (The line is shared by the manager and secretary.)

  • When there is an incoming call on the shared line, the LED blinks red every second.
  • When the shared line is in talking state, the LED is steady red.
  • When call hold is actively enabled on the shared line, the LED blinks red every 3 seconds.

Programmable button LED or line button LED when the programmable button or line button is set as the Call Forward button

When the call forward function is enabled on the phone, the LED is steady green.

Programmable button LED or line button LED when the programmable button or line button is set as the Do Not Disturb (DND) button

When the phone is in DND state, the LED is steady red.

Programmable button LED or line button LED when the programmable button or line button is set as the Pickup or Group Pickup button

When the pickup account has an incoming call, the LED blinks red every second.

Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 91628

Downloads: 1501

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next