No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Converged Conference (EC3.0)

Converged Conference (EC3.0)

eSpace 7910/7950 supports interconnection with the converged conference of eSpace EC V300R001 solution from V200R003C00SPCe00. A converged conference supports two modes: MCU-centric mode and cascading mode.

  • Ensure that your login mode is account login and has been assigned the instant conference (server-based conference) rights.
  • Ensure that on the phone web page, you have enabled conference right and the instant conference rights and set the conference type to Instant conference.

You can join a converged conference in any of the ways listed in Table 8-5.

Table 8-5 Joining a converged conference

If You Want to...

Then...

Join a converged conference by dialing numbers

  1. Dial the conference access code.
  2. Enter the password.
    • In the MCU-centric mode, enter the participant password (Attendee Passcode) and press the pound key.
    • In the cascading mode, enter the participant password (Attendee Passcode) if you are a participant and enter the moderator password (Convener Passcode) if you are the moderator, and press the pound key.
NOTICE:

To avoid the risks incurred by the system's remembering the password in the call record, the method of directly dialing the conference access code, star key, password, and pound key in sequence to join a conference is not recommended.

Join a converged conference using an eSpace client upon invitation

Answer the conference call.

Join a converged conference using the Web Meeting client upon invitation

Answer the conference call.

You can perform the following operations after joining a converged conference:

  • In MCU-centric mode, you can mute yourself or exit the conference if you are a participant.
  • In cascading mode, you can perform operations listed in Table 8-7 if you are the moderator.
Table 8-6 Converged conference in MCU-centric mode

If You Want to...

Then...

Mute yourself

  • Turning mute on: Press the Mute button during a call. is then displayed in the status bar of your phone.
  • Turning mute off: Press the Mute button if your phone is muted.

Exit actively

Hang up.

Table 8-7 Converged conference in cascading mode

If You Want to...

Then...

Add a participant

  1. Press Add on the conference screen.
  2. Enter the number of a contact.
    NOTE:
    • You can also press Contact to access your contact list or press History to access your call history and select a number.
  3. Press Add.

    The Participant List screen is displayed.

  4. Press Done.
NOTE:
  • The maximum number of participants allowed in a conference is specified when the convener creates the conference on the server. The IP phone functioning as the moderator supports a maximum of 19 participants.

View the details of a participant

  1. Press the arrow buttons to select the profile picture of a participant.
  2. Press Details.

Mute a participant

  1. Press the arrow buttons to select a participant to mute.
  2. Press Mute.
NOTE:

You can press Unmute to unmute the participant.

Mute yourself

  • Turning mute on: Press the Mute button during a call. is then displayed in the status bar of your phone.
  • Turning mute off: Press the Mute button if your phone is muted.

Remove a participant

  1. Press the arrow buttons to select a participant to remove.
  2. Press More to navigate to Remove and press Remove.
  3. Press OK.

Exit actively

  1. Press More to navigate to Exit and press Exit.
  2. Press OK.

End a conference

  1. Press More to navigate to End and press End.
  2. Press OK.
Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 92526

Downloads: 1501

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next