No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MLA

MLA

The Multi-Line Appearance (MLA) service is supported in the UC2.X network environment, allowing multiple IP phones to share multiple lines.

When others call the access code of the primary phone in an MLA group, an incoming call notification window is displayed on all IP phones that use the shared line. Any IP phone in the MLA group can answer the call.

The primary number of the shared line is used to log in to the primary IP phone, and the other numbers of the shared line are all device IDs, which are used to log in to the other IP phones in the MLA group.

Outgoing Call on a Shared Line

Any IP phone in an MLA group can place calls using a shared line.

When a shared line has an outgoing call on an IP phone, the other IP phones in the MLA group cannot use the shared line to place or receive calls but they can use idle shared lines to place or receive calls.

Incoming Call on a Shared Line

  1. When the first shared line receives a call, all IP phones in the MLA group ring at the same time and the indicator of the first shared line blinks red.
  2. After an IP phone in the group answers the call, the indicator of the first shared line is steady red on all IP phones, indicating that the line is occupied.
  3. When the call is ended, the indicator is off on all IP phones, indicating that the line is idle again.

When the first shared line is idle and the second shared line is occupied, if a new call comes in, the indicator of the first shared line blinks red on all IP phones.

Call Hold

Group Hold

When a shared line is engaged in an ongoing call, the user who answers this call can press the Hold softkey on the IP phone to place the call on hold in group mode.

Any user in the group can press the Retrieve softkey to resume the call.

Private Hold

When a shared line is engaged in an ongoing call, the user who answers this call can press the PrivHold softkey on the IP phone to place the call on hold in private mode.

The indicator of the shared line is steady red, indicating that the line is occupied. The other users in the group cannot resume the call.

Before using the private hold function, ensure that you have been assigned the private hold service rights. For any questions, contact your system administrator.

Call Transfer

Any IP phone in the group can transfer a call that is carried on the shared line.

Press the Transfer softkey, enter the destination number, and press the Done softkey.

Outgoing Call on a Private Line

When the shared line is occupied, users can press the line button and select a private line to call each other in the group.

Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 109328

Downloads: 1567

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next