No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Call Hold

Call Hold

During call hold, the two parties in the call cannot hear each other.

  • Holding a call: During a call, press Hold to hold the call.
  • Resuming a call: During active call hold, press Resume to resume the call.

If your phone has been assigned two or more lines and one or more of them are idle, you can press the line button of an idle line, Newcall softkey, or directly dial a number on the keypad to place a new call after you place your current call on hold.

  • If the call hold function is enabled by yourself, you cannot end the call. If the call placed on hold is the only call on your phone, the phone reminds you that there is a call on hold by means of periodic sound notifications and the MWI.
  • When multiple calls are connected on the phone, you can press the line button to hold or resume a call.
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 92287

Downloads: 1501

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next