No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Line and Programmable Buttons

Line and Programmable Buttons

If you cannot configure programmable buttons or line buttons on the phone web page, contact your system administrator.

Setting the Line Buttons

You can perform the following steps to set a line button:

  • It is recommended that you not use a line button as a programmable button.
  • Only unused line buttons can be set to shortcut buttons.
  1. (For eSpace 7910) On the web page, choose Buttons > Line and Programmable Button.

    (For eSpace 7950) On the web page, choose Buttons > Line Buttons.

  2. Click the gray button next to the line button.

    The Select a function page is displayed.

  3. Select a function to use and set the parameters.

    Table 5-2 describes the functions and parameters of the programmable buttons.

  4. Click Save.

Setting the Programmable Buttons

You can perform the following steps to set a programmable button:

  1. (For eSpace 7910) On the web page, choose Buttons > Line and Programmable Button.

    (For eSpace 7950) On the web page, choose Buttons > Expansion Module.

  2. Click the gray button for the corresponding programmable button.

    The Select a function page is displayed.

  3. Select a function to use and set the parameters.

    Table 5-2 describes the functions and parameters of the programmable buttons.

  4. Click Save.

Printing Programmable Button Labels (Only for eSpace 7910 IP Phone)

You can perform the following steps to print programmable button labels:

  1. On the web page, choose Buttons > Line and Programmable Button.
  2. Click Print Preview.

    The page for printing labels is displayed.

  3. Click Print.
Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 97835

Downloads: 1533

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next