No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power Saving

Power Saving

On the Power Saving screen, you can set the following functions:

  • Auto Sleep

    If no operation is performed on the phone within a specified period, the phone changes to the sleep state.

  • Sleep

    If the sleep mode is enabled, the phone changes to the sleep state instantly.

  • Auto Brightness

    After this function is enabled, the phone automatically decreases the screen brightness when the phone is idle or in an active call.

  • Screensaver

    After this function is enabled, the phone automatically changes to the screensaver state if no operation is performed on the phone within a specified period (value for Delay).

  • In versions earlier than V200R003C00SPC700, you can enable or disable the auto sleep function as required. However, from V200R003C00SPC700, the auto sleep function is enabled by default, and you cannot disable it.
  • When the sleep mode and screensaver are enabled at the same time, the sleep mode takes effect with preference.
  • When the phone enters the sleep or screensaver state on the home screen, you can press a key on the key pad, the Headset button, or the Speaker button to directly access the dialing screen; you can press the Contact button, Call History button, or Message button to access the contacts, call history, or message screen.

Enabling the Auto Sleep Function

In versions earlier than V200R003C00SPC700, you can perform the following steps to enable the auto sleep function. From V200R003C00SPC700, auto sleep is enabled by default.

  1. On the home screen, choose Apps > System > Power Saving > Auto Sleep.

    The Auto Sleep screen is displayed.

  2. Press Enable.

    The Sleep After field is displayed.

  3. Select a value and press Select.

Disabling the Auto Sleep Function

In versions earlier than V200R003C00SPC700, you can perform the following steps to disable the auto sleep function. From V200R003C00SPC700, auto sleep cannot be disabled.

  1. On the home screen, choose Apps > System > Power Saving > Auto Sleep.

    The Auto Sleep screen is displayed.

  2. Select Auto Sleep and press Disable.

Setting the Sleep Function

You can perform the following steps to set the one button to sleep function:

  1. On the home screen, choose Apps > System > Power Saving.

    The Power Saving screen is displayed.

  2. Select Sleep and press Enable.

    You can press any button to disable the sleep function.

Enabling the Auto Brightness Function

You can perform the following steps to enable the auto brightness function:

  1. On the home screen, choose Apps > System > Power Saving > Auto Brightness.

    The Auto Brightness screen is displayed.

  2. Press Enable.

    The Adjustment Time field is displayed.

  3. Select a value and press Select.

    If the value for Sleep After is the same as the value for Adjustment Time, the phone automatically changes to the sleep state at the appointed time.

Disabling the Auto Brightness Function

You can perform the following steps to disable the auto brightness function:

  1. On the home screen, choose Apps > System > Power Saving > Auto Brightness.

    The Auto Brightness screen is displayed.

  2. Select Auto Brightness and press Disable.

Enabling the Screensaver Function

You can perform the following steps to enable the screensaver function:

  1. On the home screen, choose Apps > System > Power Saving > Screensaver.

    The Screensaver screen is displayed.

  2. Press Enable.

    The Delay field is displayed.

  3. Select a value and press Select.

Disabling the Screensaver Function

You can perform the following steps to disable the screensaver function:

  1. On the home screen, choose Apps > System > Power Saving > Screensaver.

    The Screensaver screen is displayed.

  2. Select Screensaver and press Disable.
Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 91900

Downloads: 1501

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next