No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DND

DND

After the DND function is enabled, all incoming calls are automatically rejected but you can still place calls.

  • Before using the Server DND function, ensure that your account has been assigned the Server DND service rights. For any questions, contact your system administrator.
  • The Server DND function is available only for the registered line. For a new line, the DND function must be enabled again.

In the IMS+UC network environment, two DND modes are available: Forward to mailbox and Ring off. The default DND mode is Forward to mailbox.

In the IMS+UC network environment, you cannot configure but only view the DND function. If you want to change the DND mode settings, contact your system administrator.

You can view the DND mode of your phone on the phone LCD screen or web page.

  • On the LCD screen, choose Apps > Pref. > Call Settings > DND.
  • One the web page, choose Call Settings > DND.

Setting DND

In the EC6.X or UC2.X network environment, you can set the DND function on your phone LCD screen or web page. For detailed operations, see Table 7-9.

Table 7-9 Setting DND

Where to Set

How to Set

Call Settings on the phone LCD screen

  1. Choose Apps > Pref. > Call Settings > DND.
  2. Select a DND mode.
    • Server DND: The phone does not receive any calls.
    • Local DND: Two options Incoming call rejected and Incoming call muted are available.
  3. Press Select.

Call Settings on the phone web page

  1. Choose Call Settings > DND.
  2. Select a DND mode.
    • Server DND: The phone does not receive any calls.
    • Local DND: Two options Incoming call rejected and Incoming call muted are available.
  3. Click Save.

Enabling or Disabling DND

In the IMS+UC network environment, press Status on the home screen, and select DND to enable DND, or select Idle or Busy to disable DND.

In the EC6.X or UC2.X network environment, you can press DND on the home screen to enable or disable (if already enabled) DND.

If you have assigned the DND function to a line button or programmable button, you can also press the line button or programmable button to enable or disable DND.

When DND is enabled, DND enabled is displayed on the home screen and is displayed in the status bar.

Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 108479

Downloads: 1560

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next