No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing a Local Conference

Managing a Local Conference

After creating a local conference, the initiator can manage the local conference. For detailed operations, see Table 7-11.

Table 7-11 Managing a local conference

If You Want to...

Then...

Add a participant

  1. Press Add.
  2. Enter the number of a contact.
    NOTE:

    You can press Contact to select a contact in your contact list, or press History to select a contact in the call history.

  3. Press Call.
  4. Press Join after the contact answers the call.
NOTE:

The phone supports a local audio conference involving a maximum of six parties.

Mute a participant

  1. Press the arrow buttons to select a participant to mute.
  2. Press Mute.
NOTE:

You can press Unmute to unmute the participant.

Mute or unmute yourself

  • Muting: During the conference, press the Mute button. is displayed in the status bar of the phone screen.
  • Unmuting: When you are muted, press the Mute button to unmute yourself.

Remove a participant

  1. Press the arrow buttons to select a participant to remove.
  2. Press More to navigate to Remove and press Remove.

    The message "Remove the participant?" is displayed.

  3. Press Yes.

Place a conference on hold

  • Placing a conference on hold: Press Hold.
  • Resuming a conference: Press Resume to connect to a conference that was placed on hold.
NOTE:
  • When the conference initiator presses Hold, the conference is placed on hold.
  • When a participant presses Hold, only the participant is placed on hold.

End a conference

  1. Press More to navigate to End and press End.

    The message "End the conference?" is displayed.

  2. Press Yes.
NOTE:
  • When the conference initiator presses End, the conference is ended.
  • When a participant presses End, only the participant leaves the conference.
Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 91358

Downloads: 1497

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next