No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

User Guide

eSpace 7910 and 7950 IP Phone V200R003C30

Describes the services supported by the eSpace 7910&7950 IP phones and the implementation of such services.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BLF

BLF

After the BLF function is enabled, the status of the monitored accounts is displayed on the programmable and line buttons. You can press a programmable button to dial a monitored number.

Enabling BLF

  • Before using the BLF function, ensure that your account has been assigned the BLF rights. For any questions, contact your system administrator.
  • In the IMS+UC network environment, you can view the status of other contacts using BLF.
  • The IP Phone supports up to 120 status monitoring numbers.

The method of enabling BLF for a line button is the same as that for a programmable button on the expansion module. The following uses a programmable button on the expansion module as an example.

To configure the speed dial programmable button and enable status monitoring, perform the following operations:

  1. (For eSpace 7910) On the home screen, choose Apps > Pref.> Buttons > Programmable Buttons.

    (For eSpace 7950) On the home screen, choose Apps > Pref. > Buttons > Expansion Module.

    The Expansion Module screen is displayed.

  2. Select a programmable button and press Modify.

    The screen for setting the programmable button is displayed.

  3. Select Speed Dial and press Select.
  4. Select BLF and press Enable, and set other parameters as prompted. For details about the parameter description, see Table 5-2.
  5. Press Done.

To configure the BLF programmable button, perform the following operations (available in VFOneNet):

  1. (For eSpace 7910) On the home screen, choose Apps > Preferences > Buttons > Programmable Buttons.

    (For eSpace 7950) On the home screen, choose Apps > Preferences > Buttons > Expansion Module.

    The Expansion Module screen is displayed.

  2. Select a programmable button and press Modify.

    The screen for setting the programmable button is displayed.

  3. Select BLF and press Select.
  4. Set BLF parameters. For details about the parameter description, see Table 5-2.
  5. Press Done.

For details about the LED status, see LED.

If you cannot set BLF on your phone LCD screen, contact your system administrator.

Download
Updated: 2019-10-30

Document ID: EDOC1000129167

Views: 97449

Downloads: 1532

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next