No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperMetro Configuration Guide for Huawei SAN Storage Using OS Native Multipathing Software

This configuration guide provides recommendations for deploying and configuring HyperMetro on Huawei OceanStor storage systems using operating systems' native multipathing software.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes how to configure storage systems and multipathing software for the SAN HyperMetro solution when the host uses OS native multipathing software.

Intended Audience

This document is intended for:

  • Huawei storage technical support engineers
  • Technical engineers of Huawei's partners

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

General Format Conventions

Format

Description

Times New Roman

The main body must be written using Times New Roman.

Book Antiqua

Heading 1, Heading 2, Heading 3, and Block Label must be written using Book Antiqua.

Times New Roman

CAUTION, NOTE, and TIP must be written using Times New Roman.

Terminal Display

Information displayed on screens must be written using Terminal Display. In addition, the part that users input in the information displayed on screens must be written in boldface.

Boldface

File paths must be in boldface, such as C:\Program Files\Huawei.

CLI Format Conventions

Format

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italics.

Download
Updated: 2019-05-10

Document ID: EDOC1000131291

Views: 61358

Downloads: 1858

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next