No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


License Usage Guide

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S

This document describes usage of product licenses.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
License Alarms Are Generated on a Device

License Alarms Are Generated on a Device

If a license alarm is generated, handle the alarm based on Table 5-2.

Table 5-2  Possible causes and solutions for handling a license alarm
License Alarm Message Possible Cause Solution

GTL/2/DEFAULTVALUE:OID [OID] Current license value is default, the reason is [reason].

The authentication of the license file failed.

  1. Check whether the license file name entered when you activate the license is correct. If not, enter the correct license file name and activate the license again.
  2. Collect alarm information and configuration information, and then contact technical support personnel.

GTL/2/RESOURCE_USEDUP:OID [OID] Resource item [item-name] is nearly used up.

The usage percentage of service resources reached or exceeded the threshold defined by the license.

  1. Apply for a new license file with sufficient resources.

  2. Run the license active file-name command to activate the new license file.

GTL/2/NEARDEADLINE:OID [OID] License feature [item-name] is near deadline, remain time is [date] days.

The license was approaching the deadline and soon would become invalid.

  1. Apply for a new license file before the deadline.

  2. Run the license active file-name command to activate the new license file.
Updated: 2019-05-20

Document ID: EDOC1000138050

Views: 9172

Downloads: 62

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next