No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

License Usage Guide

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S

This document describes usage of product licenses.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading or Downgrading the License Version

Upgrading or Downgrading the License Version

Prerequisites

Target license file or ESN of the target device has been known.

Context

After upgrading the device software version, you are advised to upgrade the license file and load it to the device again. Otherwise, service exceptions may occur due to changes between license control items of different versions. In addition, to use functions corresponding to new license control items, you must also upgrade the license version.

Only permanent license can be upgraded or downgraded. Temporary license and fix-term license cannot be upgraded or downgraded.

Procedure

  1. Log in to Huawei ESDP system: http://app.huawei.com/isdp.
  2. Choose License Commissioning and Maintenance > Version Change in the navigation tree to access the Version Change page.
  3. Read through the content in Notice, select I have read and agree to the above, and click Next.

  4. Click Upload to upload the license file to be upgraded or downgraded.

    NOTE:
    You can search for and download the target license file in the ESDP system through the ESN of the device. The navigation path is Equipment(Node) Management. If the local license file is different from that in the ESDP system, the license file in the ESDP system applies.

  5. Select the current product name or version and the target product name or version.

    Select the right product and version to ensure that the product and version are the same as those of the target device. Otherwise, the license file cannot be loaded, and services will be interrupted.

    NOTE:
    In an upgrade operation, the target version is later than the current version; in a downgrade operation, the target version is earlier than the current version.

  6. Check the information and click Activate License.
  7. You can download the new license file after the version is successfully changed.

    NOTE:
    You can search for and download the new license file on the Equipment(Node) Management page based on the device ESN.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000138050

Views: 9164

Downloads: 62

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next