No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

License Usage Guide

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S

This document describes usage of product licenses.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Migrating Licenses Between Devices

Migrating Licenses Between Devices

Prerequisites

The license file of the device has been revoked and the license revocation code has been obtained.

NOTE:

You can run the display license revoke-ticket command in any view to obtain the license revocation code.

Context

License migration between devices is required in the following scenarios:
  • License replacement of a spare part: Typically, a customer buys one more device, the device has a license, but the license is original. After a device operates on the network for a period of time, the license of the device may need to be updated. Therefore, if the device on the network becomes faulty, you cannot directly replace the device with the spare part. Instead, you need to perform license replacement of the spare part on the ESDP to make the spare part obtain the latest license.

    For channel partners and final users, contact Huawei technical support personnel in this scenario.

  • ESN change with a revocation code: An incorrect ESN is bound to the license file, and no record about binding a correct ESN to the license exists on the ESDP system, apply for the license file corresponding to the new device ESN again.

    If a license binding record exists on the ESDP system, you need to refer to Rolling Back a License to roll back the license file to which an incorrect ESN is bound.

  • ESN change without a revocation code: The ESN of the license file is incorrect and no revocation code can be obtained for the original license file because of a misoperation. You need to apply for the license file corresponding to the correct ESN again.

    For channel partners and final users, contact Huawei technical support personnel in this scenario.

NOTE:

The ESN change operation can be performed only on permanent licenses, not on temporary or fixed-term licenses.

This section describes only procedures for changing the ESN with a revocation code.

Procedure

  1. Log in to the ESDP system at http://app.huawei.com/isdp.
  2. Choose License Commissioning and Maintenance > ESN Change from the left navigation tree to enter the ESN Change page.
  3. Select With Revocation Code for ESN Change type, enter the revocation code of the license file in which the ESN needs to be changed, and click Verify.

  4. After verifying the revocation code, the system automatically displays device information of the original ESN. Enter the new ESN to start the ESN change task. Click Save.

  5. Choose My Task > Operation Record to check ESN change tasks on the displayed page. Click the link under Download to download the .zip package to the local device.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000138050

Views: 9150

Downloads: 62

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next