LE1D2C02FEE0-2-Port 100GBASE-X Interface Card (EE, CFP)

LE1D2C02FEE0

S9310X chassis: supported in V200R010C00 and later versions

S9300X-4, S9300X-8, and S9300X-12 chassis: not supported

Basic functions

Provides two 100GE optical ports for data transmission and switching.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping

Supported

1

When a 100GE port is not split, this indicator shows the status of the 100GE port.

Green

Steady on: A link has been established on the 100GE port.

Blinking: The 100GE port is transmitting and receiving data.

2

When a 100GE port is split into two 40GE ports, indicators 0 and 1 show the status of the 40GE ports.

Green

When indicator 0 turns on, it shows the status of the first 40GE port derived from the 100GE port. When indicator 1 turns on, it shows the status of the second 40GE port.

Steady on: A link has been established on the 40GE port.

Blinking: The 40GE port is transmitting and receiving data.

3

When a 100GE port is split into ten 10GE ports, indicators 0 to 9 show the status of the 10GE ports.

Green

When indicator 0 turns on, it shows the status of the first 10GE port derived from the 100GE port. Similarly, the other indicators turn on in sequence to show status of the rest of 10GE ports.

Steady on: A link has been established on the 10GE port.

Blinking: The 10GE port is transmitting and receiving data.

4

RUN/ALM: running status indicator

Green

Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.

Red

Steady on: The card has failed and the fault requires manual intervention.

Yellow

Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Connector type

CFP

Optical port attributes

Depend on the 40GE CFP Optical Modules and 100GE CFP Optical Modules used

Applicable cable

CFP optical module and LC optical fiber

CFP optical module and MPO optical fiber (MPO-MPO, MPO-2*MPO, or MPO-10*DLC optical fiber)

Physical specifications

• Dimensions (H x W x D): 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.95 in.)

• Weight: 4.20 kg (9.26 lb)
• Maximum power consumption: 339 W

Environment specifications

• Operating temperature:
  • 0°C to 45°C (32°F to 113°F)

03030XJJ

2-port 100GBASE-X interface card (EE, CFP)

LE1D2C02FEE0