LE0MF48SA-48-Port 100BASE-X Interface Card (EA, SFP)

S9300X Series Switches Hardware Description

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

Version Mapping

Table 7-91 Switch chassis and software versions matching the card

Card Name	S9300X Chassis
LE0MF48SA	S9310X chassis: supported in V200R010C00 and later versions S9300X-4, S9300X-8, and S9300X-12 chassis: not supported

Card Name

S9300X Chassis

LE0MF48SA

S9310X chassis: supported in V200R010C00 and later versions

S9300X-4, S9300X-8, and S9300X-12 chassis: not supported

Introduction

The LE0MF48SA can be installed in:

Slots 01 to 10 in an S9310X chassis.

Figure 7-48 Appearance of the LE0MF48SA

Functions

Table 7-92 Functions of the LE0MF48SA

Function	Description
Basic function	Provides forty-eight FE optical ports for data transmission and switching.
Distributed forwarding	Performs concurrent data forwarding using a distributed data plane.
Hot swapping	The LE0MF48SA is hot swappable.

Indicators and Ports

Figure 7-49 Indicators on the LE0MF48SA panel

Table 7-93 Indicators on the LE0MF48SA panel

Number	Indicator	Color	Description
1	ACT indicator of a lower optical port	Yellow	Blinking: The port is transmitting and receiving data.
2	ACT indicator of an upper optical port	Yellow	Blinking: The port is transmitting and receiving data.
3	LINK indicator of a lower optical port	Green	Steady on: A link has been established on the port.
4	LINK indicator of an upper optical port	Green	Steady on: A link has been established on the port.
5	RUN/ALM: running status indicator	Green	Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running. Slow blinking: The card software is running properly. Fast blinking: The card software is starting.
		Red	Steady on: The card has failed and the fault requires manual intervention.
		Yellow	Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 7-50 Ports on the LE0MF48SA panel

1	Forty-eight 100M BASE-X optical ports

100M BASE-X optical port

Table 7-94 lists the attributes of a 100M BASE-X optical port.

Table 7-94 100M BASE-X optical port attributes

Attribute	Description
Connector type	SFP
Optical port attributes	Depend on the FE SFP/eSFP Optical Modules used.
Applicable cable	FE SFP/eSFP optical module and LC optical fiber

Specifications

Table 7-95 Specifications of the LE0MF48SA

Item	Description
Physical specifications	Dimensions (H x W x D): 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.95 in.) Weight: 2.54 kg (5.60 lb) Maximum power consumption: 64 W

Item

Description

Physical specifications

Dimensions (H x W x D): 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.95 in.)

Weight: 2.54 kg (5.60 lb)
Maximum power consumption: 64 W

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 7-96 Ordering information

Part Number	Card Description	Card Model
03020PUX	48-port 100BASE-X interface card (EA, SFP)	LE0MF48SA NOTE: After the display elabel command is executed, the manufactured model of the card is displayed as LE02F48SA.

Version Mapping
Introduction
Functions
Indicators and Ports
Specifications
Ordering Information

Translation

简体中文

Download

Updated: 2022-05-19

Document ID: EDOC1000138177

Downloads: 469

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode