Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DC Power Cable (Quick-Connect Cord End Terminal)
Connectors and power capacity of a power cable must match the device on which the cable is used. Therefore, a device must use the power cables delivered with it.
Types of DC Power Cables
DC power cables (quick-connect cord end terminal) between power distribution boxes and power distribution frames include -48 V power cables and RTN ground cables.
A DC power module uses a pair of DC power modules: a -48 V power cable and an RTN ground cable combined with a quick-connect terminal, as shown in Figure 8-2.
1. Quick-connect terminal |
2. Cable tie |
3. Cord end terminal |
Connection
The cord end terminals of the -48 V power cable and an RTN ground cable connect to a power distribution box or power distribution frame, and the quick-connect terminal is connected to a 2200 W DC power module.