LE1D2G48TX1E-48-Port 10/100/1000BASE-T Interface Card (X1E, RJ45)
Version Mapping
Card Name |
S9300X Chassis |
---|---|
LE1D2G48TX1E |
S9310X chassis: supported in V200R010C00 and later versions S9300X-4, S9300X-8, and S9300X-12 chassis: not supported |
Introduction
The LE1D2G48TX1E provides high performance, large entry sizes, and a large buffer for data switching. This card is highly integrated and has a large port density.
The LE1D2G48TX1E can be installed in:
- Slots 01 to 10 in an S9310X chassis.
Functions
- Communicates with the MPU and works under the control of the MPU.
- Searches for routes and destination addresses of data packets for forwarding.
- Forwards data packets.
Function |
Description |
---|---|
Basic functions |
Provides forty-eight GE electrical ports for data access and switching. |
Distributed forwarding |
Performs concurrent data forwarding using a distributed data plane. |
Hot swapping |
The LE1D2G48TX1E is hot swappable. |
Indicators and Ports
Number |
Indicator |
Color |
Description |
---|---|---|---|
1 |
LINK/ACT indicator of an upper electrical port |
Green |
Steady on: A link has been established on the port. Blinking: The port is transmitting and receiving data. |
2 |
LINK/ACT indicator of a lower electrical port |
||
3 |
RUN/ALM: running status indicator |
Green |
Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running. Slow blinking: The card software is running properly. Fast blinking: The card software is starting. |
Red |
Steady on: The card has failed and the fault requires manual intervention. |
||
Yellow |
Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.) |
1 |
Forty-eight 10/100/1000BASE-T ports |
10/100/1000BASE-T port
Table 7-186 describes the attributes of a 10/100/1000BASE-T port.
Specifications
Item |
Description |
---|---|
Physical specifications |
|
Ordering Information
Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.
Part Number |
Card Name |
Card Model |
---|---|---|
03030RGC |
48-port 10/100/1000BASE-T interface card (X1E, RJ45) |
LE1D2G48TX1E |