No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showcheckinfo

mrr showcheckinfo


The mrr showcheckinfo command is used to view the status of metadata repair.


mrr showcheckinfo




Diagnostic view

Usage Guidelines



View the metadata repair status.

admin:/diagnose>mrr showcheckinfo 
Operate Type                  : data extent 
Disk Domain ID                : 0 
Result                        : --- 
Fail Reason                   : --- 
Begin Time                    : --- 
End Time                      : --- 
Repaired Queue                : 0 
Need Repair Queue             : 0 
Repaired Extent            : 0 
Need Repair Extent            : 0

System Response

The following table describes the parameter meanings.



Disk Domain ID

Indicates the disk domain ID.


Indicates the result of the operation.

Fail Reason

Indicates the fail reason of the operation.

Begin Time

Indicates the begin time of the operation.

End Time

Indicates the end time of the operation.

Repaired Queue

Indicates the repaired count of queue.

Need Repair Queue

Indicates the need repair count of queue.

Repaired Extent

Indicates the repaired count of extent.

Need Repair Extent

Indicates the need repair count of extent.

Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 752009

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next