No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
setpwronpausestage.sh

setpwronpausestage.sh

Function

The setpwronpausestage.sh command is used to suspend or resume a phase during the power-on process of a storage system.

Format

setpwronpausestage.sh [pausethirdinsmod | resumethirdinsmod | pausenodepoweron | resumenodepoweron | pauseobjpoweron | resumeobjpoweron]

Parameters

Parameter

Description

Value

pausethirdinsmod

Suspends module loading. This parameter takes effect only after the storage system restarts.

-

resumethirdinsmod

Resumes module loading.

-

pausenodepoweron

Suspends the adding of a specified controller into a cluster. If the controller has been added into a cluster, the storage system must be restarted for the parameter to take effect.

-

resumenodepoweron

Resumes the adding of a specified controller into a cluster.

-

pauseobjpoweron

Suspends object power-on. This command must be executed on the master controller. If this object has been powered on, the storage system must be restarted for the parameter to take effect.If the ID of the master controller is different from that before the restart, you must execute this command on the new master controller for the configuration to take effect.

-

resumeobjpoweron

Resumes object power-on.

-

Modes

Minisystem mode

Usage Guidelines

The suspension or resuming operation is performed for different objects based on the parameter you set. If you run "setpwronpausestage.sh pausenodepoweron", the adding of a specified controller into a clusterthe will be suspended. If you run "setpwronpausestage.sh resumenodepoweron", the adding of a specified controller into a cluster will be resumed. If the controller has been powered on, you must restart the storage system for the command to take effect.

Example

  • Suspend module loading.
    Storage: minisystem> setpwronpausestage.sh pausethirdinsmod 
    Please reboot the system to take effect.
  • Resume module loading.
    Storage: minisystem> setpwronpausestage.sh resumethirdinsmod
  • Suspend the adding of a specified controller into a cluster.
    Storage: minisystem> setpwronpausestage.sh pausenodepoweron 
    If the system power-on has gone through this phase, you must restart the storage system to enable the command to take effect.
  • Resume the adding of a specified controller into a cluster.
    Storage: minisystem> setpwronpausestage.sh resumenodepoweron
  • Suspend object power-on.
    Storage: minisystem> setpwronpausestage.sh pauseobjpoweron 
    If the system power-on has gone through this phase, you must restart the storage system to enable the command to take effect.
  • Resume object power-on.
    Storage: minisystem> setpwronpausestage.sh resumeobjpoweron 

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 664789

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next