No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_takeover finish_switch_path

change lun_takeover finish_switch_path

Function

The change lun_takeover finish_switch_path command is used to confirm that the host paths of the specified LUN have been switched to the paths between the host and the target disk array.

Format

change lun_takeover finish_switch_path lun_id=?

Parameters

Parameter

Description

Value

lun_id=?

LUN ID.

To obtain the value, run "show lun_takeover general".

Views

Developer view, Engineer view

Usage Guidelines

None

Example

Confirm that the host paths of the specified LUN have been switched to the paths between the host and the target storage array.

engineer:/>change lun_takeover finish_switch_path lun_id=0 
DANGER: You are about to switch over the LUN paths. This operation may cause data loss. 
Suggestion: Before performing this operation, confirm that the host path of the LUN has been switched to the target array. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 699594

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next