No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show log_rate limit

show log_rate limit

Function

The show log_rate limit command is used to query log quota information.

Format

show log_rate limit controller_id=? [ gid=? ]

Parameters

Parameter

Description

Value

controller_id=?

Controller ID.

The value is in the format of "XA","XB","XC","XD", where the "X" is an integer ranging from 0 to 3.

gid=?

Process group ID.

The value must be an integer from 1 to 4,294,967,294.

Views

Developer view, Engineer view

Usage Guidelines

None

Example

Query log quota information of GID "2" on controller "0A".

developer:/>show log_rate limit controller_id=0A gid=2 
  GID        : 2 
  Log Number : 1200 
  Interval : 30 
  Burst      : 10000 
  Resume     : 86400

System Response

The following table describes the parameter meanings.

Parameter

Meaning

GID

Process group ID.

Log Number

Maximum number of log lines that can be printed in the period.

Interval

Period, expressed in "days".

Burst

Burst log quota.

Resume

Log print restoration time, expressed in "seconds".

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 698139

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next