No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system config_msg_status

change system config_msg_status

Function

The change system config_msg_status command is used to disable or enable engine configuration.

Format

change system config_msg_status action=?

Parameters

Parameter

Description

Value

action=?

Indicates to enable or disable engine configuration.

The value can be "allow" or "forbid", where:

  • forbid:to disable engine configuration.
  • allow:to enable engine configuration.

Views

Developer view

Usage Guidelines

None

Example

To prevent the current engine from sending configuration messages, run the following command:

developer:/>change system config_msg_status action=forbid 
DANGER: You are going to perform system configuration control operations. If you disable engine configuration, configuration changes cannot be performed on the engine. If you enable engine configuration, configuration changes can be performed on the engine. 
Suggestion: Before you run this command, confirm that you have selected the engine you want to configure. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 696269

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next