No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The command is used to run commands related to the BDM module.

Format -h [sdId] -a






Shows help information.



Shows functions of each subcommand of the BDM module.



Ends the diagnosing state of a disk.



Minisystem mode

Usage Guidelines

This command is used to end the diagnosing state of a disk. Please use this command under the guidance of technical support engineers.


Ends the diagnosing state of a disk.

Storage: minisystem> 72 
admin:/diagnose>sddebug triggerDiagEnd 72 
[BDM SD]Trigger diagEnd action for sdId 72 ok. 

System Response


Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 754100

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next